DE
EN
DE
EN
TUHH > Forschungsbericht > 2005

Forschungsbericht 2005



5-09 Kunststoffe und Verbundwerkstoffe

 Logo
Denickestr. 15
21073 Hamburg

Tel.: 040 / 42878 - 3238
Fax: 040 / 42878 - 2002

e-mail: hoffmann@tu-harburg.de
www: http://www.tu-harburg.de/kvweb

Professoren
Prof.Dr.-Ing. Karl Schulte (Leitung) (TUHH)
   

Sekretariat
Ingrid Hoffmann (TUHH)
   

wissenschaftliche Mitarbeiter/innen
Dr.-Ing. Georg Broza (TUHH)
Dr.-Ing. Bodo Fiedler (BMBF)
Dipl.-Ing. Andreas Gagel (DFG)
Dipl.-Ing. Florian Gehrig (Airbus)
Dipl.-Chem. Florian Gojny (TUHH)
Dipl. Min. Katrin Hedicke (DFG)
Dipl.-Ing. Stefan Hinz (Airbus)
Dipl.-Ing. Eduard Ilinich (TUHH)
Dipl.-Ing. Leif Ole Meyer (BMBF)
Dip.-Ing. Yvonne Pegel (BMBF)
Dr. Luis Antonio Sanchez de Almeida Prado (GKSS)
Dipl.-Ing. Kirsten Prehn (Helmholtz Gesellschaft)
Dipl.-Ing. Jan Sumfleth (DFG)
Dipl.-Ing. Malte Wichmann (EU)
Dr.-Ing. Hans Wittich (TUHH)
   

sonstige Mitarbeiter/innen
Peter Gührs (TUHH)
Wilfried Mäker (BMBF)
Hella Wilde (TUHH)

 

Forschungsprojekte

 

Publikationen

Veröffentlichungen

  • 5-09.001V
    H. Wittich, K. Schulte, M. Kupke, H. Kliem, and W. Bauhofer: ¿TheMeasurement of Electrical Properties of CFRP for Damage Detection and Strain Recording¿, Proc. 2. ECCM-CTS, Hamburg (1994) 447-457.
  • 5-09.002V
    R. Schüler, J. Petermann, K. Schulte, H.-P. Wentzel:Percolation in carbon black filled epoxy resin. Int. Symp. on Polymer Morphology and Electrical Properties,Lodz, Poland, July 1995, pp.261-268.
  • 5-09.003V
    R. Schüler, K. Schulte, J. Petermann, H.-P. Wenzel:Elektrisch leitfähiges GFK: Herstellung und Anwendung.DGM-Tagung, Verbundwerkstoffe und Werkstoffverbunde, 24.-25. Okt. 1995, Bayreuth, pp.567-570.
  • 5-09.005V
    H. Stumpf, T. Otto, K. Schulte: D.O.S.-Wirkstrukturen verformen.Kettenwirk-Praxis 3 (1996) pp.57-58.
  • 5-09.006V
    H. Stumpf, T. Lenz, K. Schulte: Simulation eröffnet neue Wege im Design von Gewirkstrukturen. Kettenwirk-Praxis 2 (1996) pp.17-19.
  • 5-09.007V
    K. Schulte, R. Schüler, J. Petermann, H.-P. Wenzel: Elektrisch leitfähiges Epoxidharz für GFK Verbundwerkstoffe. Polymerwerkstoffe ¿96, 18.-20. Sept. 1996, Merseburg, pp.114-117.
  • 5-09.008V
    H. Stumpf, K. Schulte, W. Zäh, C. H. Andersson, I. Verpoest, S. Baeten, E. Mäder, K. Eng: Thermoplast-Verbundwerkstoffe. Kettenwirk-Praxis 2 (1997) pp. 43-50.
  • 5-09.009V
    Rüdiger Schüler, Jürgen Petermann, Karl Schulte, Hans-Peter Wentzel: Agglomeration and Electrical Percolation Behavior of Carbon Black Dispersed in Epoxy Resin. Journal of Appl. Polymer Science, 1997, pp. 1741 - 1746
  • 5-09.010V
    A. Klisch, B. Fiedler und K. Schulte: Finite Elemente Modellierung der mikromechnischen Spannungskonzentration und Lasteinleitung in Faserverbundwerkstoffen, Verbundwerkstoffe und Werkstoffverbunde, Hrsg. K. Friedrich, DGM Informationsgesellschaft mbH, 1997 771-776
  • 5-09.012V
    M. Kupke, K. Schulte, H.-P. Wentzel: Electrically conductive glasfibre reinforced epoxy resin.European Conference of Composite Materials (ECCM-8), Vol. 1, pp. 429-436 .Naples, Italy, June 3.-6., 1998
  • 5-09.013V
    V.Altstädt , F. Diedrichs , T.Lenz , H.Bardenhagen and D.Jarnot: Polymer foams as core materials in Sandwich laminates (Comparison with honeycomb), Polymers & Polymer Composites, accepted 08.1998
  • 5-09.014V
    R. Schüler, K. Schulte, J. Petermann, H.-P. Wentzel: Electrical conductive glass fiber composites: manufacturing and application in aircraft design and non-destructive testing.Composites A, (1998).
  • 5-09.015V
    F.v.Lacroix, M. Werwer, K.Schulte: Solution impregnation of polyethylene fibre/ polyethylene matrix composites. Composites A 29A, (1998) pp.371-376.
  • 5-09.016V
    F. v. Lacroix, H.-Q. Lu, K. Schulte: Wet powder impregnation for polyethylene composites: preparation and mechanical properties. Composites 30A (1998) pp. 369-373.
  • 5-09.017V
    F. v. Lacroix, J. Loos, K. Schulte: Morphological investigations of polyethylene fibre reinforced polyethylene. Polymers 40 (1998) pp. 843-847.
  • 5-09.018V
    T. Prasse, L. Flandin, K. Schulte und W. Bauhofer: ¿In situ observation of electric field induced agglomeration of carbon black in epoxy resin, Appl. Phys. Lett., Vol. 72, S. 2903 ff (1998)
  • 5-09.019V
    H. Stumpf, E. Mäder, S. Baeten, T. Pisanikovski, W. Zäh, K. Eng, C.-H. Andersson, I. Verpoest, K. Schulte: New thermoplastic composite preforms based on split-film warp-knitting.Composites A (1998) pp. 1511-1523.
  • 5-09.020V
    H. Stumpf, Th. Lenz, K. Schulte, C.-H. Andersson: The mechanical behaviour of single tricot warp knitted fabrics. Part I: An experimental investigation of knitted fabrics of verying loop geometry under tensile stress with special attention given to inter-yarn friction.
  • 5-09.021V
    T. Otto; K. Schulte, D.G. Feldmann: Fresh water supply system of nonmetallic materials for large aircraft. Plastic Pipes X, Göteborg, Sept. 1998, 641-649
  • 5-09.022V
    B. Fiedler, A. Klisch and K. Schulte: Stress concentrations in multiple fibre composites, Composites Part A, Elsevier Science Ltd., 1998 29A 1013-1019
  • 5-09.023V
    A. Klisch, B. Fiedler and K. Schulte: Interfacial transverse failure in polymer composites, Proceedings of ICCI-VII, May 10-13 1998 94-95
  • 5-09.024V
    B. Fiedler, A. Klisch and K. Schulte: Thermal residual stresses in fibre reinforced polymers, Proceedings of ACCM-I, October 7-9 1998 604/1-604/4
  • 5-09.025V
    K. Schulte, A. Poeppel; Polyethylene Gradient Material, Processing and Properties, FGM'98, Dresden 1998
  • 5-09.026V
    F. v. Lacroix, M. Werwer, K. SchulteSolution impregnation of polyethylene fibre / polyethylene matrix composites.Composites A 29A (1998)
  • 5-09.027V
    B. Fiedler, A. Klisch, K. SchulteStress concentrations in multiple fibre model composites.Composites 29A (1998)
  • 5-09.028V
    F. v. Lacroix, H.-Q. Lu, K. SchulteWet powder impregnation for polyethylene composites: preparation and mechanical properties. Composites 30A (1998)
  • 5-09.029V
    F. v. Lacroix, J. Loos, K. SchulteMorphological investigations of polyethylene fibre reinforced polyethylene.Polymers 40 (1998)
  • 5-09.030V
    T. Prasse, L. Flandin, K. Schulte, W. BauhoferIn situ observation of electric field induced agglomeration of carbon black in epoxy resin. Applied Physical Letters 72 (1998)
  • 5-09.031V
    M. Kupke, K. Schulte, H.P. WentzelElectrically conductive glass fibre reinforced epoxy resin.Materials Research Innovation 2 (1998)
  • 5-09.032V
    H. Stumpf, E. Mäder, S. Baeten, T. Pisanikovski, W. Zäh, K. Eng,C.-H. Andersson, I. Verpoest, K. SchulteNew thermoplastic composite preforms based on split-film warp-knitting.Composites 29A (1998)
  • 5-09.033V
    A. Klisch, B. Fiedler, K. SchulteInterfacial transverse failure in polymer composites. Seventh Int. Conf. on Composite interfaces (ICCI-VII) 10.-13.Mai 1998, Fujisawa,Shonan (J)
  • 5-09.034V
    M. Kupke, K. Schulte, H.P. WentzelElectrically conductive glass fibre reinforced epoxy resin. Eighth European Conference on Composite Materials (ECCM-8) 3.-6. Juni 1998, Neapel (I)
  • 5-09.035V
    S. Baeten, K. Schulte und 5 weitere AutorenOptimisation of the bending performance of GMT-produced low cost textile reinforced thermoplastic composites by an experimental design. Eighth European Conference on Composite Materials (ECCM-8) 3.-6. Juni 1998, Neapel (I)
  • 5-09.036V
    M. Kupke, K. SchulteMeasurement of electrical properties of CFRP for damage detection and health monitoring. Eighth European Conference on Composite Materials (ECCM-8) 3.-6. Juni 1998, Neapel (I)
  • 5-09.037V
    T. Otto, K. Schulte, F. G. FeldmannFresh water supply system of nonmetallic materials for large aircraft. Plastics Pipes X,14. - 17. September 1998, Svenska Mässan, Göteborg (S)
  • 5-09.038V
    B. Fiedler, A. Klisch, K.SchulteThermal residual stresses in fibre reinforced polymers. First Asian-Australian Conf. on Composite Materials (ACCM-1) 7.-9. Okt. 1998 Osaka, Japan
  • 5-09.039V
    B. Fiedler, M. Hojo, S. Ochiai, K. SchulteYield criteria for polymers in composite-like stress state. 23rd Symp. of the Society for Composite Materials Japan, 12.-13. Nov. 1998, Yamagata, Japan
  • 5-09.040V
    H. Stumpf, Th. Lenz, K. Schulte, C.-H. AnderssonThe mechanical behaviour of single tricot warp knitted fabrics. Part I: An experimental investigation of knitted fabrics of verying loop geometry under tensile stress with special attention given to inter-yarn friction. Journal of the Textile Institute 90 (1999)
  • 5-09.041V
    K.SchulteCyclic Mechanical Loading. Reinforced Plastics Durability, Editor: G.Pritchard, Woodhead Publishing Ltd. Cambridge, UK, (1999)
  • 5-09.042V
    M. Schlecht, K. SchulteAdvanced calculation of the room-temperature shapes of unsymmetric laminates. J. of Composite Materials 33 (1999)
  • 5-09.043V
    H. Stumpf, Th. Lenz, K. Schulte, C.-H. AnderssonThe mechanical behaviour of single tricot warp knitted fabrics. Part I: An experimental investigation of knitted fabrics of verying loop geometry under tensile stress with special attention given to inter-yarn friction. Journal of the Textile Institute 90 (1999)
  • 5-09.044V
    L. Flandin, T. Prasse, R. Schüler,W. Bauhofer, K. Schulte, J.-Y. CavalléAnomalous percolation transition in carbon-black epoxy composite materials.Physical Review B59 (1999)
  • 5-09.045V
    J. Sandler, M.S.P. Shaffer, T. Prasse, W. Bauhofer, K. Schulte, A. WindleDevelopment of a dispersion process for carbon nanotubes in an epoxy matrix and the resulting electrical properties. Polymer 40 (1999)
  • 5-09.046V
    K. Schulte, A. PoeppelPolyethylene gradient material, processing and properties.Materials Science Forum 308-311 (1999)
  • 5-09.047V
    S.Ochiai, M.Hojo, K. Schulte, B. FiedlerInterfacial debonding in single fiber-composite with a cracked matrix - Part I: Debonding during cooling. Int. Journal of Materials & Product Technology 14 (1999)
  • 5-09.048V
    S.Ochiai, M.Hojo, K. Schulte, B. FiedlerInterfacial debonding in single fiber-composite with a cracked matrix - Part II: Debonding during loading. Int. Journal of Materials & Product Technology 14(1999)
  • 5-09.049V
    B. Fiedler, M. Hojo, S. Ochiai, K. Schulte FEM modelling of the matrix failure in transverse loaded CFRP. Proc. of the FRP Symposium, March 15-17, 1999, Kyoto, Japan
  • 5-09.050V
    L. Birken, E. Junge, A. Poeppel, M. Morlock, K. Schulte, E. Schneider PE-PE-composite as tibial bearing partner in total kne replacement. Int. Conference of the Society for Biomaterials, 28.4.-2.5.1999 Providence, Rhode Island, USA
  • 5-09.051V
    A. Klisch, B. Fiedler, K.SchulteInfluence of the thermal dependent matrix properties on the residual stress distribution in a model composite. International Conference on Composite Materials (ICCM-12), Paris 5.-9. Juli 1999
  • 5-09.052V
    T. Prasse, F. Michel, G. Mook, K. Schulte, B. BauhoferElectrical resistance and accoustic emission during cyclic tensile loading of CFRP laminates. International Conference on Composite Materials (ICCM-12), Paris 5.-9. Juli 1999
  • 5-09.053V
    C.-A. Keun, K. SchulteSemiflexible composites ¿ design of an endless warp-knitted reinforced thermoplastic elastomer. International Conference on Composite Materials (ICCM-12), Paris 5.-9. Juli 1999
  • 5-09.054V
    A. Poeppel, K. SchulteMicrohardness of PE / PE ¿ composite and polyethylene gradient material. International Conference on Composite Materials (ICCM-12), Paris 5.-9. Juli 1999
  • 5-09.055V
    J. F. Neft, P. Schwarzer, K. SchulteInfluence of quasi lifetime treatments on the static and fatigue durability of continuous glass fibre reinforced polypropylene. DURACOSYS 99, 12.-14. Juli, Brüssel
  • 5-09.056V
    A. Klisch, H. D. Wagner, K.SchulteThe thermal residual stress distribution in a model composite. Interfacial Phenomena in Composite Materials (IPCM 99), Berlin 8.-10. September 1999
  • 5-09.057V
    B. Fiedler, M. Hojo, S. Ochiai, K. SchulteThe parabolic failure criteron applied to the matrix in transverse loaded CFRP. Interfacial Phenomena in Composite Materials (IPCM 99), Berlin 8.-10. September 1999
  • 5-09.058V
    Chr. Keun, K. SchulteCharacterisation of fibre/matrix interface strength in polymer fibre reinforced thermoplastic elastomer composites.Interfacial Phenomena in Composite Materials (IPCM 99), Berlin 8.-10. September 1999
  • 5-09.059V
    K. Schulte, A. Poeppel, F. v. LacroixHigh density polyethylene fibre/polyethylene matrix composites for improved wear behaviour. 7th Mesoscopic Materials Symposium, Kyoto, Japan (30. July. 1999)
  • 5-09.060V
    B. Fiedler, K. Schulte, M. Hojo, S. OchiaiInsitu observationof the load transfer in GFRP model composites by photoelastic analysis. Proc. 6th Jpan Int. SAMPE Symposium, 26.-29. Oct. 1999,Tokyo, Japan
  • 5-09.061V
    B. Fiedler, M. Hojo, S. Ochiai, K. SchulteFEM modelling of the initial matrix failure in CFRP under transverse tensile loading. . Proc. 6th Jpan Int. SAMPE Symposium, 26.-29. Oct. 1999,Tokyo, Japan
  • 5-09.062V
    S. Ochiai, M. Tanaka, M.Hojo, Bodo Fiedler and Karl SchulteNondimensional Simulation of Deformation and Fracture Behavior of Unidirectional Composites. 124th Meeting of the Japan Institute of Metals (March, 1999)
  • 5-09.063V
    B. Fiedler, M. Hojo, S. Ochiai, Karl Schulte Influence of Thermal Residual Stresses on the Initial Matrix Failure in Transversely Loaded CFRP. 7th Symposium of Interfacial Materials Science on Composites (April, 1999)
  • 5-09.064V
    S. Ochiai, B. Fiedler, M. Hojo and K. SchulteGrowth of Interfacial Debonding under Stress- and Displacement Controls of 2-Dimensional Notched Unidirectional Composites. 7th Syomposium of Interfacial Materials Science on Composites (April, 1999)
  • 5-09.065V
    S. Ochiai, M. Hojo, B. Fiedler and K. SchulteNondimensional Simulation of Fracture Process of Unidirectional Composites. Annual Meeting of Japan Society for Composite Materials (April, 1999)
  • 5-09.066V
    S. Ochiai, M. Tanaka, M. Hojo, B. Fiedler and K. SchulteNondimensional Monte Carlo Simulation of Fracture Porcess of UD Composite.Annual Meeting of Division of Materials and Mechanics of The Japan Society of Mechanical Engineers (October, 1999)
  • 5-09.067V
    B. Fiedler, M. Hojo, S. Ochiai and K. SchulteThe Influence of Thermal Residual Stresses on the Transverse Strength of CFRP under Tensile Load Using FEM. 24th Symposium of The Japan Society for Composite Materials(JSCM), Osaka, Japan (November 11-12,1999)
  • 5-09.068V
    S. Ochiai, M.Tanaka, T. Fujita, S. Kimura, M. Hojo, B. Fiedler and K. SchulteInfluences of Residual Stresses on Fracture Behavior of Unidirectional Brittle Matrix Composites. 125th Meeting of The Japan Institute of Metals(November, 1999)
  • 5-09.069V
    B. Fiedler., M. Hojo, S. Ochiai, K. SchulteFEM Modeling of the Matrix Failure in transverse Loaded CFRP; Proc. of the 28th FRP-Symposium, March 15-17, 1999, Kyoto, Japan
  • 5-09.070V
    J. Sandler, M.S.P. Shaffer,T. Prasse, W. Bauhofer, K. Schulte, A.H. Windle Development of a dispersion process for carbon nanotubes in an epoxy matrix and the resulting electrical properties. Carbon NanoTec ¿99, Brighton, U.K., 1999
  • 5-09.071V
    J. Sandler, M.S.P. Shaffer, T. Prasse, W. Bauhofer, K. Schulte, A.H. WindleDevelopoment of a dispersion process for carbon nanotubes in an epoxy matrix and the resulting electrical properties. Washington D.C., USA, 1999
  • 5-09.072V
    A. Plumtree, J. PetermannOn the threshold of short fatigue crack growth. In X.R. Wu and X.G. Wang.Proceedings of the 7th International Fatigue Congress, Beijing, China, June 8-12, 1999
  • 5-09.073V
    J. Petermann, A. PlumtreeA unified fatigue failure criterion based on the critical plane concept. In K. Schulte and K.U. Kainer, Verbundwerktstoffe und Werkstoffverbunde, Hamburg, Germany, October 5-7, 1999
  • 5-09.074V
    E. Gross, A. GagelMaßnahmen zur Schwingungsminderung in stall-geregelten Windkraftanlagen.VDI-Schwingungstagung 1999, Germany
  • 5-09.075V
    O. Jacobs, N. Mentz, A. Poeppel, K. SchulteSliding wear performance of HD-PE reinforced by continuous UHMWPE fibres. Wear 244 (2000)
  • 5-09.076V
    G. Broza and K. SchulteOrientation behaviour in axial tension of half-melt poly(ether-b-ester) copolymers.In: Block Copolymers. Editors: F. J. Baltá Calleja and Z. Roslaniec. Marcel Dekker New York, Basel (2000)
  • 5-09.077V
    K. Schulte and F. v. LacroixHigh-density polyethylene fibre/polyethylene matrix composites.Comprehensive Composite Materials (2000)
  • 5-09.078V
    J. K. Kim, K. Schulte et al. Effect of surface treatment on mode I interlaminar fracture behaviour of plain glass woven fabric composites: Part I. Report of the 2nd round robin test results. Composite Interfaces 7 (2000)
  • 5-09.079V
    L. Flandin, T. Prasse, W. Bauhofer, K. Schulte and J. Y. CavailléCarbon black filled thermoset with controlled microstructure for electrical applications. Matériaux & Technique 7,8 (2000)
  • 5-09.080V
    J. Szafko, K. Schulte, B. BrozaMicrophase separation of segmented Poly(ether-ester) Multiblock Copolymer Films crystallised under high strain rates.Fibres & Textiles in Eastern Europe 8 (2000) pp. 35-39.
  • 5-09.081V
    B. Lahr, J. Sandler.Kohlenstoff-Nanoröhrchen: Hochfeste Verstärkungsstoffe für CompositesKunststoffe 90, 04 ¿ 96 (2000)
  • 5-09.082V
    Symposium für experimentelle Orthopädie, 11. - 12. Februar 2000,München. K. Schulte, J. SandlerApproaches to carbon-nanotube / carbon-nanofibre-reinforced polymers.Gordon Conference, Ventura Beach USA (2000)
  • 5-09.083V
    J. Sandler, B. Broza, W. Bauhofer, K. Schulte, A. WindleCarbon-nanotube-reinforced polymers: Physical and mechanical properties.Gordon conference, Ventura Beach USA (2000)
  • 5-09.084V
    G. Broza, K. Schulte, J. Nastalczyk, J. SandlerPotential of nanoscale carbon fibre reinforcements for high performance semi-crystalline polymers.2000 MRS Fall Meeting, Boston USA (2000)
  • 5-09.085V
    L. M. O. Birken, A. Poeppel, M. M. Morlock, K. Schulte, E. SchneiderScreening wear test of multiphase polyethylene materials for tibial components:Determination of testing parameters for physiological testing conditions.6th World Biomaterials Conference, 15.-20- Mai 2000, Kumeala, Hawaii, USA
  • 5-09.086V
    L. M. O. Birken, O. Lührs, Th. Otto, A. Poeppel, M. M. Morlock, K. Schulte, E. SchneiderImproving the life expectancy of knee protheses: reduction of stresses in the tibial component by a functionally graded material.6th World Biomaterials Conference, 15.-20- Mai 2000, Kumeala, Hawaii, USA
  • 5-09.087V
    R. Hübler, B. Fiedler, K.Schulte Finite element modelling of the fiber / matrix debonding in glass fiber model composites. 9th European Conference on Composite Materials (ECCM 9), Brighton 4.-7. Juni 2000
  • 5-09.088V
    R. Sinclair, R.J. Young, A. Klisch and K. SchulteExperimental measurement and numerical modelling of local strain distributions in multiple fibre model composites. 9th European Conference on Composite Materials (ECCM 9), Brighton 4.-7. Juni 2000
  • 5-09.089V
    J. Sandler, A. Kalabushkin, G. Broza, W. Bauhofer, K. Schulte, A.H. WindleApproaches to carbon-nanotube / carbon-nanofibre-reinforced polymers, 4-th Intern. Workshop on Nondestructive Testing and Computer Simulation in Science and Engineering, June 12-17 2000, St. Petersburg, Russia, SPAS Vol. 4, pp. G30-34.
  • 5-09.090V
    G. Broza, J. Sandler, K. SchultePotential of nanoscale carbon fibre reinforcements for high performance semi-crystalline polymers.International Symposium on Polymer Physics PP¿2000, Huang Shan, China, Sept. 13-17, 2000, pp. 237
  • 5-09.091V
    A. Romankiewicz, T. Sterzynski, G. Broza, K. SchulteMolten state orientation induced modification of structure and properties of nucleated polypropylene.1st International Conference MoDeSt 200, Palermo, Italy, Spt. 3-7, 2000
  • 5-09.092V
    D. Machida, T. Kawada, B. Fiedler, M. Hojo, S. Ochiai, M. AndoMode I fatigue crack propagation for unidirectional carbon fiber/epoxy laminates in liquid nitrogen.Proc. Of the 29th FRP Symposium, March 15-17, 2000, Kyoto, Japan (in Japanese), pp. 123-124
  • 5-09.093V
    L. M. O. Birken, O. Lührs, Th. Otto, A. Poeppel, M. M. Morlock, K. Schulte, E. SchneiderVerbesserung der Lebensdauer von Knieendoprothesen: Spannungsreduktion in der tibialen Komponente durch gradierte Werkstoffe.XXII Münchner
  • 5-09.094V
    M. Kupke, R. Schüler and K. Schulte Monitoring electrical conductivity in glass and carbon fibre reinforced polymer composites.Composite Science and Technology 61 (2001) pp. 837 - 848.
  • 5-09.095V
    R. Schüler, S. Joshi and K. SchulteDamage detection in CFRP by electrical conductivity mapping. Composite Science and Technology 61 (2001) pp. 921 - 931.
  • 5-09.096V
    T. Prasse, F. Michel, G. Mook, K. Schulte, W. BauhoferComparative investigation of electrical resistance and acoustic emission during cyclic loading of CFRP laminates. Composite Science and Technology 61 (2001) pp. 831 - 836.
  • 5-09.097V
    S. Ochiai, M. Hojo, K. Schulte, F. FiedlerNondimensional simulation of influence of toughness of interface on tensile stress-strain behavior of unidirectional microcomposite. Composite 32A (2001) pp. 749-762
  • 5-09.098V
    B. Fiedler, M. Hojo, S. Ochiai, K. Schulte and M. Ochi FEM modelling of the initial matrix failure in CFRP under static transverse failure load. Composite Science and Technology 61 (2001) pp. 95-106.
  • 5-09.099V
    J. Petermann, A. PlumtreeA unified fatigue failure criterion for unidirectional laminates.Composites A 32 (2001) pp. 107-118.
  • 5-09.100V
    B. Fiedler, M. Hojo, S. Ochiai, K. Schulte and M. Ando Failure behaviour of epoxy matrix under different kinds of static loading. Composite Science and Technology, 61(2001) pp. 1615-1624
  • 5-09.101V
    B. Fiedler, M. Hojo, S. Ochiai, K. Schulte, M. OchiFinite-element modelling of the initial matrix failure in CFRP under static transverse tensile load. Composites Science and Technology, 61 (2001) pp 95-105
  • 5-09.102V
    S. Ochiai, B. Fiedler, M. Hojo, K. Schulte.Growth of interfacial debonding in notched two-dimensioinal unidirectional composite under stress and displacement controls.Composite Interface, Vol. 7 (2001) pp. 459-477
  • 5-09.103V
    T. Prasse, A. Ivankov, J. Sandler, K. Schulte, W. Bauhofer Imaging of conductive filler networks in heterogeneous materials by scanning Kelvin microscopy. J. of Applied Polymer Science, Vol. 82 (2001) pp. 3381-3386
  • 5-09.104V
    T. Prasse, M.-K. Schwarz, K. Schulte, W. BauhoferThe interaction of epoxy resin and an additional electrolyte with non-oxidised carbon black in colloidal dispersions. Colloids and Sufaces A 189 (2001) pp. 183-188.
  • 5-09.105V
    A. Flores, A. Poeppel, C. Riekel, K. SchulteEvidence of a transcrystalline interphase in fibre PE homocomposites as revealed by microdiffraction experiments using syncroton radiaton.J. of Polymer Science, Part B: Polymer Physics B 40 (2001) pp. 749-761
  • 5-09.106V
    G. Broza, K. Schulte, I. SzafkoMechanical characterisation of uniaxially oriented copoly(ether ester) films.Fibres & Textiles in Eastern Europe 9 (2001) pp. 46-49.
  • 5-09.107V
    J. F. Neft, K. Schulte, P. SchwarzerMechanical degradation of continuous glass fibre-reinforced thermoplastics under static and fatigue loading: a prepreg laminate - technical textile comparison. ASTM STP 1416
  • 5-09.108V
    Y. Oki, B. Fiedler, M.K. Hojo, S. Ochiai, H. Moriai, K. WatanabeInfluence of copper ratio on deformation behaviour of Nb-Ti filament in superconducting composite wire, Japan (in Japanese) (2001)
  • 5-09.109V
    W. Kulak, Z. RoslaniecStudy of phase structure of polymer blends using atomic force microskopy.Prace Naukowe Insytutu Technologil Organ Icznej i Tworzyw Szcznych Politechniki Weoclawskiej. XV Konferencja Naukowa Modyfikaja Polimerow, Siweradow Zdroj, 19-21 Wrzesnica (2001), Serie 23, pp.159-162.
  • 5-09.110V
    J. Petermann, K. SchulteStrain based endurance limit estimation for angle-ply laminates.ASC 16, Blacksburg, VA, USA, 9.-13. Sept. 2001
  • 5-09.111V
    L: Berger, W.J. Cantwell, M. Kupke, K. Schulte, J.-K. Kim, T. Tsz-Kit, Q.Yuan, Y. Dong, H. Yang, Y. Bai, M. Kotaki, T. Kuriyma, M. Mizoguchi, H. HamadaEffect of surface treatment 0n Mode II interlaminar fracture behaviour of plain glass woven fabric composites: report of the third SIMS round robin test. Int. Conf. on Composite Materials (ICCM-13), Peking (2001)
  • 5-09.112V
    A. Klisch, R. Sinclair, R.J. Young, K. SchulteStress distribution around a single fibre rupture ¿ FEA-modelling and fluorescence spectroscopy.Proceedings of IPCM2001, September 2001
  • 5-09.113V
    B. Fiedler, M. Hojo, S. OchiaiThe influence of thermal residual stresses on the transverse strength of CFRP using FEM.IPCM 2001, Arcachon, France (2001)
  • 5-09.114V
    M. Hojo, T. Kawada, S. Machida, K. Moriya, S. Matsuda, B. Fiedler, S. Ochiai, H. AoyamaEffets of fiber type (CF and ALF) and temperature (RT and 77K) on the interlaminar fracture properties composite laminates with common epoxy matrix.Proc. Of the 5th International Conference on Durability Analysis of Composite Systems, November 6 ¿ 9, 2001, Tokyo, Japan
  • 5-09.115V
    J. Petermann, K. SchulteThe effects of creep and fatigue stress ratio on the long term properties of angle-ply CFRP.11th International Conference on Composite Structures, Melbourne, Australia, November 19-21, 2001
  • 5-09.116V
    J. Sandler, M. Shaffer, M. Montes, C. Cooper, A. Kalabushkin, M. Halsall, K. Schulte, A.H. Windle, R.J. YoungEvaluation of the mechanical properties of carbon nanotubes and carbon nanofibres under hydrostatic pressure by Laser-Raman-SpectroscopyNanoSpace 2001, Texas, U.S.A., 2001-10-17.
  • 5-09.117V
    J. Sandler, M. Shaffer, J. Nastalczyk, Ch. Keun, K. Schulte, A. H. WindleCarbon-Nanofibre-Filled Thermoplastic Composites.NANOTUBE 2001, Potsdam (2001)
  • 5-09.118V
    J. Sandler,A. Kalabushkin, G. Broza, W. Bauhofer, K. Schulte, A.H. WindleApproaches to carbon-nanotube / carbon-nanofibre-reinforced polymers.Proceedings of the SPAS ¿ The St. Petersburg Academy of Sciences and Strength Problems, 4th Int. Workshop NDTCS, St. Petersburg, Russia (2001)
  • 5-09.119V
    J. Sandler, M.S.P. Shaffer, Y.-M. Lam, A. Windle, P. Werner, V. Altstädt, J. Nastalczyk, G. Broza, K. Schulte, C.-A. KeunCarbon-Nanofibre-Filled Thermoplastic Composites.MRS 2001 Fall Meeting, Boston MA, USA (2001)
  • 5-09.120V
    J. Sandler, J.S.P. Shaffer, Y.-M Lam, C.-A. Keun, J. Nastalczyk, G. Broza, K. Schulte, A.H. WindleCarbon-nanofibre-filled thermoplastic composites.Nanotube 2001, Postdam, Germany (2001)
  • 5-09.121V
    Nanocomposites, Schichtsilikate als Verstärkungsmaterial vonPolymeren. Tagungsband: 7. Nationales Symposium SAMPE Deutschland e.V.,Erlangen 22.-23.02.2001.
  • 5-09.122V
    Z. Denchev, T. Ezquerra Sanz, A. Nogales Ruiz, I. Sics, C. Alvarez, G. Broza, K.SchulteRelaxation behavior of poly(ethylene terephthalate) / poly-(ethylene naphthalene 2,6-dicarboxylate) blends prepared by cryogenic blending.Journal of Polymer Science, Part B: Polymer Physics, Vol. 40, pp. 2570-2578 (2002)
  • 5-09.123V
    K. SchulteSensing with Carbon Fibres in Polymer Composites.Materials Science Research International, Vol.8, No.2 (June, 2002) pp. 43-52
  • 5-09.124V
    J. Petermann, K. Schulte.Strain based service time estimation for angle-ply laminates.Composite Science and Technology 62 (2002) pp. 1043-1050
  • 5-09.125V
    J. K. Kim, K. Schulte et al. Effect of surface treatment and Weave structure on interlaminar fracture behaviour of plain glass woven fabric composites: Part II. Report of the 2nd round robin test results. Composite Interfaces 9 (2002) pp. 207-218.
  • 5-09.126V
    J. Petermann and K. Schulte The effects of creep and fatigue stress ratio on the long term behaviour of angle-ply CFRP. Composite Structures 57(2002) pp. 205-210.
  • 5-09.127V
    J. Petermann, A. Plumtree, K. SchulteAn analytical model to predict fracture of off-axis unidirectional compositesAdvanced Composites Letter, 11(5):243-249 (2002)
  • 5-09.128V
    M. Cadek, J.N. Coleman, V. Barron, K. Hedicke, W.J. BlauMechanical properties and morphology of carbon nanotube reinforced semi crystalline and amorphous polymer composites. Applied Physics Letters, Vol.81, 27; pp. 5123-5125 (2002)
  • 5-09.129V
    M. Hojo, S. Matsuda, B. Fiedler, S. Ochiai, H. Aoyama, Mode I and Mode II delamination fatigue crack growth behavior of alumina fiber/epoxy laminates in air and liquid nitrogen.Int. J. Fatigue 24: 109-118 (2002)
  • 5-09.130V
    B. Fiedler, M. Hojo, S. OchiaiThe influence of thermal residual stresses on the transverse strength of CFRP using FEM. Composite 33A, No. 10. pp 1323-26 (2002)
  • 5-09.131V
    B. Fiedler, M. Hojo, S. OchiaiThe parabolic failure criterion applied to epoxy resinMesomechanics 2002, Aalborg, Dänemark, August 26 ¿ 30, 2002
  • 5-09.132V
    J. Petermann, S. Hinz and K. Schulte. A nonlinear damage accumulation model for carbon fibre reinforced angle-ply laminates. Proceedings of the 10th European Conference on Composite Materials, Brugge, Belgium, 03.-07. June, 2002
  • 5-09.133V
    J. Petermann and K. Schulte. Creep prediction and creep-fatigue interaction in angle-ply laminates. Proceedings of the 10th European Conference on Composite Materials, Brugge, Belgium, 03.-07.June, 2002
  • 5-09.134V
    J. Petermann and K. Schulte. Two stress fatigue and sequence effects of carbon fibre reinforced epoxy. 12th International Conference on Mechanics of Composite Materials. p. 155, Riga, Latvia, 09.-13. June, 2002
  • 5-09.135V
    S. Ochiai, M. Hojo, M. Tanaka, H. Okuda, K. Schulte, B. FiedlerNondimensional simulation of tensile behavior of UD microcomposite under energy release rate- and shear stress-criteria for interfacial debonding. Proceedings of the 9th International Conference on Composite Interface, pp. 9-10 (2002)
  • 5-09.136V
    S. Ochiai, H. Okuda, H. Tanaka, M. Tanaka, M. Hojo, K. Sculte, B. FiedlerShear lag - Monte Carlo simulation of tensile behavior of UD ceramic matrix composites. Proceedings of CREST International Symposium on SIC/SIC Composite Materials R&D and Its Application to Advanced Energy Systems (2002), Ceramic Transactions 144, (2002) pp.221-232
  • 5-09.137V
    L.A.S.de A. Prado, V. Haramus, C.S. Karthikeyan, B. Ruffmann, R. Willumeit, S.P. Nunes, K. SchulteCharacterisation of novel lonomer membranes based on Poly(ether ether ketone) and layered materials. Annual Users Meeting of GKSS Research Reactor, Geesthacht, Germany. Annual Report of Users (2002)
  • 5-09.138V
    L.A.S. de A. Prado, M.L. Ponce, S.P. Nunes, R. Willumeit, S.S. Funari, K. Schulte.Morphology of SPEEK membranes: Effect of composition of the membrane.Annual Users Meeting of HASYLAB at DESY, Hamburg, Germany. Annual Report of Users (2002)
  • 5-09.139V
    L.A.S. de A. Prado, M.L. Ponce, B. Ruffmann, S.P. Nunes, R. Willumeit, V. Haramus, G. Goerigk, K. Schulte.Organic-inorganic membranes tailored for fuel cell applications: Analysis of the morphology of the inorganic components by ASAXS. Annual Users Meeting of HASYLAB at DESY, Hamburg, Germany. Annual Report of Users (2002)
  • 5-09.140V
    C.S. Karthikeyan, M. Schossig, B. Ruffmann, K. Schulte, S.P. Nunes.Novel lonomeric membranes with layered silicates. Proceedings of International Conference on Solid State Protonic Conductors, University of Surrey, Guildford, UK, August 2002.
  • 5-09.141V
    S.P. Nunes, C.S. KarthikeyanCharacterisation of polymer electrolyte membranes by SANS. Experimental Report of 2001: Materials Science Workshop, GKSS Forschungszentrum, Geesthacht, Germany, p. 27, March 2002
  • 5-09.142V
    J. Sandler, M. Shaffer, Y. Lam, A. Windle, P. Werner, V. Altstädt, J. Nastalczyk, G. Broza, K. Schulte, Ch. Keun.Carbon-Nanofibre-filled thermoplastic composites. Eds. ¿Making functional Materials with Nanotubes¿. Mat.Res.Soc.Symp.Proc. Vol. 706, Warrendale, Pennsylvania, USA (2002)
  • 5-09.143V
    M Cadek, J.N. Coleman, V. Barron, K. Hedicke, W.J. BlauMechanical and thermal properties of carbon nanotube reinforced polymer composite.Conference Proceeding of SPIE Optolreland Galway, 4876 (2002)
  • 5-09.144V
    F.H. Gojny, J. Nastalczyk, K. SchulteCNT/epoxy composites ¿ improvement of matrix adhesion via chemical modification of carbon nanotubes. Nanospace 2002, 5th International Conference on Integrated Nano/Micro/Biotechnology for Space, Medical and Commercial Applications. Galveston/TX, USA, 24.-28.6.2002
  • 5-09.145V
    A. Gagel, K. Schulte.Modelling the mechanical degradation process of fibre reinforced polymers (FRPs) by a more-dimensional approach.In H. Sol and J. Degrieck, editors,. Proceedings of the 10th European Conference on Composite Materials, pp. 293: 1-6, Brugge, Belgium, 3.-7.6.2002
  • 5-09.146V
    A. GagelDevelopment of a degradation model for estimating the strength and service life of non-crimp-facric reinforced composite structures ¿ Ihfluence of the binding yarn on the mechanical degradation of NCF-GRFP.DFG JSPS Symposium, Kyoto University 24.10.2002
  • 5-09.147V
    J. PetermannThe effects of creep and fatigue stress ratio on the long term behaviour ofangle ply CFRP.SAMPE Europe Students Conference, Paris, France 07.-08.04.2002
  • 5-09.148V
    J. Petermann, S. Hinz, K. SchulteTwo stress fatigue and sequence effects of carbon fibre reinforced epoxy.Symposium on Fatigue Testing and Analysis under Variable Amplitude Loading Conditions. Pp. 35:1-3, Tours, France 29.-31.05.2002
  • 5-09.149V
    J. Petermann, K. SchulteTwo stress fatigue and sequence effects of carbon fibre reinforced epoxy.12th International Conference on Mechanics of Composite Materials. P. 155, Riga, Latvia 09.-13.06.2002
  • 5-09.150V
    J. Petermann, K. SchulteThe creeep and fatigue behaviour of ±45°-laminates from CFRP.DFG-JSPS-Collaborative programme, Kyoto, Japan 24.09.2002
  • 5-09.151V
    B. Fiedler, K. SchulteManufacturing of high fiber volume fraction PP/GF composites.10th European Conference on Composite Materials, Brugge, Belgium, 03.-07.06.2002
  • 5-09.152V
    A. Romankiewicz, T. Sterzynski, G. Broza, K. SchulteNucleation and processing induced modification of an isotactic polypropylene (dynamic investigation of specific nucleated iPP), Polymerwerkstoffe P¿2002, Halle
  • 5-09.153V
    K. Hedicke, H. Wittich, V. Altstädt.Nanocomposites ¿ Schichtsilikate als Verstärkungsmaterial in Polymeren.SFB-Sonderkolloquium, Stuttgart, 17.-18.10.2002 (CD)
  • 5-09.154V
    K. Schulte, J. Petermann, A. GagelDarstellung von Degradationsmodellen zur Beschreibung des Ermüdungsverhaltens in Faserverbundwerkstoffen.SFB 371, Kolloquium Moderne Werkstoffe: Charakterisierung und Modellierung ihrer Schäden, Universität Stuttgart, 17.-18.10.2002
  • 5-09.155V
    A. GagelNon-scalar approach to simulate the mechanical degradation process in fibre-reinforced-polymers (FRPs). DFG JSPS Symposium, TU Hamburg-Harburg 11.06.2002
  • 5-09.156V
    J. PetermannDas Kurz- und Langzeitverhalten von Winkellaminaten.8. Nationales Symposium SAMPE Deutschland, Kaiserslautern, Germany, 07.-08.03.2002
  • 5-09.157V
    K. Schulte, J. PetermannThe creep and fatigue behaviour of angle-ply CFRP. DFG-JSPS Collaborative Programme, Hamburg, Germany, 11.06.2002
  • 5-09.158V
    K. Schulte, J. Petermann, A. GagelDarstellung von Degradationsmodellen zur Beschreibung des Ermüdungsverhaltens in Faserverbundwerkstoffen. SFB.Kolloquium: Moderne Werkstoffe ¿ Modellierung und Charakterisierung ihrer Schäden, Stuttgart, Germany, 17.-18.10.2002
  • 5-09.159V
    K. Schulte, A. Gagel, J. PetermannStand der Forschung beim Einsatz von Verbundwerkstoffen im Flugzeugbau.Hamburgische Gesellschaft für Wirtschaftsförderung:Initiative Luftfahrtstandort Hamburg, Hamburg, Germany, 14.11.2002
  • 5-09.160V
    K. SchulteGuest editorial: part B of the world wide failure exercise on failure prediction in composites. Composites Science and Technology 63 (2003)
  • 5-09.161V
    A. Gagel, K. Schulte, Non-scalar approach to simulate the mechanical degradation process in fibre-reinforced-polymers (FRP¿s), ASTM STP 1436 (2003) pp. 238-251
  • 5-09.162V
    C.S. Karthikeyan, M. Schossig, E. Radovanovic, M.C. Gonçalves, H. Wittich, K. Schulte, S.P. Nunes.Aligned Nafion® nanocomposites: Preparation and morphological characterization. Macromolecular Materials and Engineering 288, (2003) pp. 175-180
  • 5-09.163V
    Sandler, G. Broza, M. Nolte, K. Schulte, Y.-M. Lam, M.S.P. Shaffer.Crystallisation of carbon nanotube and nanofibre polypropylene composites.J. of Macromolecular Science Part B-Physics, Vol. B42 (2003) pp. 479-488
  • 5-09.164V
    Z. Roslaniec, G. Broza, K. SchulteNanocomposites based on multiblock polyester elastomers (PEE) and carbon nanotubes (CNT),Composite Interfaces, 10, (2003) pp. 95-102
  • 5-09.165V
    F.H. Gojny, J. Nastalczyk, Z. Roslanic, K. Schulte Surface modified multi-walled carbon nanotubes in CNT/epoxy-composites.Chemical Physics Letters 370, (2003) pp. 822-824
  • 5-09.166V
    W. Pompe, H. Worch, M. Epple, W. Friess, M. Gelinsky, P. Greil, U. Hempel, D. Scharnweber, K. SchulteFunctionally graded materials for biomedical applicationsMaterials Science and Engineering A362 (2003) pp. 40-60
  • 5-09.167V
    S. Ochiai, M. Hojo, M. Tanaka, H. Okuda, K. Schulte, B. FiedlerNondimensional simulation of tensile behavior of UD microcomposite under energy release rate and shear stress criteria for interfacial debondingComposite Interfaces, Vol. 0, No. 0 (2003) pp. 1-26
  • 5-09.168V
    J. Petermann, S. Hinz, K. Schulte. Degradation parameters and two-stress block fatigue of angle-ply carbon fibre reinforced epoxy. In: Fatigue Testing and Analysis under Variable Amplitude Loading Conditions, Eds.: P.C. McKeighan and N. Ranganathan, ASTM STP 1439, West Conshocken, 2005, pp 408-419
  • 5-09.169V
    L.A.S. de A. Prado, H. Wittich, K. Schulte, G. Goerigk, V. Garamus, R. Willumeit, B. Ruffmann, S.P. NunesAnomalous small-angle X-ray scattering characterization of composites based on sulfonated poly(ether ether ketone), zirconium phosphates and zirconium oxide.J. Polym. Sci. B: Polym. Phys. 42, (2004) pp. 567-575
  • 5-09.170V
    J.K.W. Sandler, S. Pegel, M. Cadek, F. Gojny, M. van Es, J. Lohmar, W.J. Blau, K. Schulte, A.H. Windle, M.S.P. Shaffer. A comparative study of melt spun polyamide-12 fibres reinforced with carbon nanotubes and nanofibres, Polymer 45 (2004) pp. 2001-2015
  • 5-09.171V
    K. SchulteGuest editorial: part C of the world wide failure exercise on failure prediction in composites. Composites Science and Technology 64 (2004) pp. 319
  • 5-09.172V
    L.A.S. de A. Prado, C.S. Karthikeyan, K. Schulte, S.P. NunesOrganic modification of layered silicates: Structural and thermal characterisations.International Conference of Inorganic Materials, Bonn, Germany, 07.-12.04.2003
  • 5-09.173V
    K. SchultePolymer composites reinforced with carbon nanotubes.Proceedings of the 24th International SAMPE Europe Conference/JEC Composites Exhibition 2003, Paris Expo, April 1-3, 2003
  • 5-09.174V
    H. Wittich, H. Ott, V. AltstädtTEM-observation on deformation and fracture of layered silicate nanocompositesProceedings of the 24th International SAMPE Europe Conference/JEC Composites Exhibition 2003, Paris Expo, April 1-3, 2003
  • 5-09.175V
    B. Fiedler, A. Gagel, T. Hobbiebrunken, K. Schulte, M. Hojo, S. OchiaiModelling of the thermal residual stresses and transverse strength of CFRP at low and high temperature.IIMM, Ungarn 2003
  • 5-09.176V
    T. Hobbiebrunken, B. Fiedler, M. Hojo, S. Ochiai, K. SchulteMicromechnical analysis of residual stresses in CFRP: Influence of matrix plasticity and cooling conditions.Euromech 453, Frankreich, December 2003
  • 5-09.177V
    T. Hobbiebrunken, B. Fiedler, M. Hojo, M. Tanaka, S. Ochiai, K. SchulteMicromechnical stress formation and initial matrix failure in fiber model composites under consideration of plastic deformation during cooling down.ATEM, Nogoya, Japan 2003
  • 5-09.178V
    T. Hobbiebrunken, B. Fiedler, M. Hojo, s. Ochiai, K. SchulteStress formation and initial matrix failure in fiber model composites under consideration of plastic deformation during manufacturing.Proceedings of JSMS Composites-32, Kyoto, Japan, March 18-20, 2003, pp. 145-146
  • 5-09.179V
    T. Hobbiebrunken, B. Fiedler, M. Hojo, S. Ochiai, K. SchulteAnalysis of thermal residual stresses and initial matrix failure in CFRP model composites.Proceedings of RIAM Symposium, Kyushu University, Kasuga, Fukuoka, Japan, March 3-5, 2003, pp. 31-36
  • 5-09.180V
    H. Wittich, H. Ott, V. AltstädtTEM-observation on deformation and fracture of layered silicate nanocomposites.Advanced Composites: The Balance between Performance and Cost, SAMPE EuropeConference/JEC Composites Exhibition , Paris, France, pp. 645-650 (2003)
  • 5-09.181V
    140. K. SchultePolymer composites reinforced with carbon nanotubes.Advanced Composites: The Balance between Performance and Cost. SAMPE EuropeConference/JEC Composites Exhibition, Paris, France, 2003, pp. 631-636
  • 5-09.182V
    E. Senderek, K. Kwiatkowski, J. Nalstalczyk, G. Broza, K. Schulte, Z. RoslaniecNanostructured polymer system of PEE/CNT. Dispersion process in reactive mixture and microscopy studies.EMRS 2003, Strasbourg, France, June 10-12, 2003
  • 5-09.183V
    S. Hinz, K. SchulteFatigue and fracture of composites28th Conference ICAF, Lucerne, Switzerland, May 5 ¿ 9, 2003
  • 5-09.184V
    J. Petermann, O. Mohr, A. Gagel, K. SchulteMechanical and thermographic characterisation of the degradation of angle-ply FRPs with respect to the strain rate28th Conference ICAF, Lucerne, Switzerland, May 5 ¿ 9, 2003
  • 5-09.185V
    I. Kinloch, M.C.M. Nolte, C.H. Buchel, K. Schulte, W. Bauhofer, A.H. WindleRepeatability and growth mechanism of nanotubes produced by the ferrocene-toluene routeMRS Fall 2003
  • 5-09.186V
    J. Dahl, J. Petermann, K. Schulte, A. PlumtreeInfluence of stress ratio on damage evolution of carbon-fibre reinforced angel-ply composites4th Canadian-International Composites Conference, Ottawa, Canada, Aug. 19-22, 2003
  • 5-09.187V
    M.S.P. Shaffer, J.K.W. Sandler, S. Pegel, A.H. Windle, F. Gojny, K. Schulte, M. Cadek, W.J. Blau, J. Lohmar, M. van EsNanotube- and Nanofibre-reinforced Polyamide-12 fibres.MRS, Boston, USA, 2003
  • 5-09.188V
    K. Hedicke, V. Altstädt, H. WittichThermal and mechanical behaviour of polyamide-6 and polyamide-66 nanocompositesConference Proceedings of CBPol ¿03, 7° Congresso Brasileiro de Polimeros, MinasGerais, Brasilien, Nov. 9 ¿ 12, 2003
  • 5-09.189V
    B. Fiedler, T. Hobbiebrunken, M. Hojo, K. Schulte, S. OchiaiFEM Modellierung der thermischen Eigenspannungen und des Matrixversagens in CFK.14. Symposium Verbundwerkstoffe und Werkstoffverbunde DGM Wien 02.-04.07.2003, pp. 599-604
  • 5-09.190V
    K. Schulte, F.H. GojnyKohlenstoff Nanotube/Epoxidharz-Composites ¿ Herstellung von Composites und Evaluierung der Mikromechnik.14. Symposium Verbundwerkstoffe und Werkstoffverbunde DGM Wien 02.-04.07.2003, pp. 522-526
  • 5-09.191V
    H. Wittich, K. Hedicke, V. Altstädt, C. MehlerOptimierung des Gefüges von Nanoplättchen aus Schichtsilikaten in Polymeren im Hinblick auf ihre mikromechnische Wirkung.14. Symposium Verbundwerkstoffe und Werkstoffverbunde DGM Wien 02.-04.07.2003, pp. 527-534
  • 5-09.192V
    L.A.S. de A. Prado, H. Wittich, K. Schulte, G. Goerigk, V. Garamus, R. Willumeit, B. Ruffmann, S.P. Nunes: Anomalous small-angle X-ray scattering characterization of composites based on sulfonated poly(ether ether ketone), zirconium phosphates and zirconium oxide. J. Polym. Sci. B: Polym. Phys. 42 (2004), pp. 567-575
  • 5-09.193V
    Nadia M. José, Luis A.S. de A. Prado, I.V.P. Yoshida: Synthesis, characterization, and permeability evaluation of hybrid organic-inorganic films. J. of Polymer Science, Part B, Polymer Phys. 42 (2004) pp. 4281-4292
  • 5-09.194V
    C.A. Martin, J.K.W.Sandler, M.S.P. Shaffer, M.-K. Schwarz, W. Bauhofer, K. Schulte, A.H. Windle: Formation of percolating networks in multi-wall carbon-nanotube-epoxy composites. Composites Science and Technology 64 (2004) pp. 2309-2316
  • 5-09.195V
    J.K.W. Sandler, S. Pegel, M. Cadek, F. Gojny, M. van Es, J. Lohmar, W.J. Blau, K. Schulte, A.H. Windle, M.S.P. Shaffer: A comparative study of melt spun polyamide-12 fibres reinforced with carbon nanotubes and nanofibres. Polymer 45 (2004) pp. 2001-2015
  • 5-09.196V
    K. Schulte: Guest editorial: part C of the world wide failure exercise on failure prediction in composites. Composites Science and Technology 64 (2004) pp. 319
  • 5-09.197V
    A. Nogales, G. Broza, Z. Roslaniec, K. Schulte, I. Sics, B.S. Hsiao, T.A. Ezquerra: Low percolation threshold in nanocomposites based on oxidized single wall carbon nanotubes and poly(butylenes terephthalate). Macromolecules 37 (2004) pp. 7669-7672
  • 5-09.198V
    A. Gagel, A. Willig, B. Fiedler, K. Schulte: In-situ Messung der Permeabilitätsverteilung im Glasfaser-Preform zur Vorhersage des Fließfrontverlaufes beim RTM-Verfahren - Injektionsverläufe mit Druckluft vorhersagen. Erneuerbare Energien, Ausgabe 11 (2004) pp. 35-37
  • 5-09.199V
    F.H. Gojny, M.H.G. Wichmann, U. Köpke, B. Fiedler, K. Schulte: Carbon nanotube-reinforced epoxy-composites ¿ Enhanced stiffness and fracture toughness at low nanotube content. Composites Science and Technology 64 (2004) pp. 2363-2371
  • 5-09.200V
    F.H. Gojny, K. Schulte: Functionalisation effect on the thermo mechanical behaviour of multi-wall carbon nanotube/epoxy-composites. Composites Science and Technology 64 (2004) pp. 2303-2308
  • 5-09.201V
    T. Hobbiebrunken, M. Hojo, B. Fiedler, M. Tanaka, S. Ochiai, K. Schulte: Thermochanical analysis of micromechanical formation of residual stresses and initial matrix failure in CFRP. JSME International Journal, Series A, Vol. 47, No. 3 (2004) pp. 349-356
  • 5-09.202V
    B. Fiedler, F.H. Gojny, M.H.G. Wichmann, W. Bauhofer, K. Schulte: Can carbon nanotubes be used to sense damage in composites?. Special Issue: Smart or adaptive Materials, Carbon nanotubes for sensing damage in composites, Annales de Chimie Science des Matériaux, 29 (6) (2004) pp. 81-94
  • 5-09.203V
    A.Gagel, B. Fiedler, K. Schulte: Mikroschädigung und Lebensdauer von Rotorblättern. Erneuerbare Energien, Ausgabe 12 (2004) pp. 33-35
  • 5-09.204V
    B. Fiedler, S. Holst, K. Schulte, T. Hobbiebrunken, M. Hojo: Modelling of the initial failure of CFRP structures by partial discretisation: a micro/macro-mechnical approach of first ply failure. Advanced Composite Letters 13, No. 5 (2004) pp. 219-226
  • 5-09.205V
    J.L.Ponce, L.A.S. de A. Prado, V. Silva, S.P. Nunes: Membranes for direct methanol fuel cell based on modified heteropolyacids. DESALINATION 162 (2004) pp. 383-391
  • 5-09.206V
    T. Hobbiebrunken, B. Fiedler, M. Hojo, M. Tanaka, S. Ochiai, K. Schulte: Influence of temperature dependent matrix plasticity on the formation of residual stresses and initial matrix failure in CF/epoxy. 8th Japan International SAMPE Symposium & Exhibition, JISSE-8, Tokyo, Japan, November 18-21, 2003, pp. 557-560
  • 5-09.207V
    F.H. Gojny, K. Schulte: Kohlenstoff Nanotube/Epoxyharz-composites ¿ Herstellung von composites and Evaluierung der Mikromechanik, DGM-Tagung 14, Symposium Verbundwerkstoffe und Werkstoffverbunde (2003) 522-526, VCH-Wiley, Weinheim
  • 5-09.208V
    M.S.P. Shaffer, J.K.W. Sandler, S. Pegel, A.H. Windle, F. Gojny, K. Schulte, M. Cadek, W.J. Blau, J. Lohmar, M. van Es: Nanotube- and Nanofibre-reinforced Polyamide-12 fibres. MRS, Mat. Res. Soc. Symp. 791 (Q10.4), Boston, USA, 2004
  • 5-09.209V
    F.H. Gojny, M.H.G. Wichmann, B. Fiedler, K. Schulte: Evaluation of the potential of carbon nanotubes AS reinforcement of an epoxy matrix and its application to Fibre Reinforced Polymers, ECCM 11, Rhodos, Greece, May 31 ¿ June 3, 2004
  • 5-09.210V
    L.A.S. de A. Prado, V.M. Garamus, M. Leticia Ponce, S. Vetter, G. Goerigk, H. Wittich, K. Schulte, S.P. Nunes, R. Willumeit: Proton-conducting nanocomposites: Distribution of the heteropolyacids in sulfonated poly(ether ether ketone) membranes revealed by anomalous small-angle X-ray scattering. ECCM 11, Rhodos, Greece, May 31 ¿ June 3, 2004
  • 5-09.211V
    B. Fiedler, S. Holst, T. Hobbiebrunken, M. Hojo, K. Schulte, S. Ochiai: Modelling of the initial failure of CFRP structures by partial discretisation: a micro / macro-mechanical approach of first ply failure. ECCM 11, Rhodos, Greece, May 31 ¿ June 3, 2004
  • 5-09.212V
    J.K.W. Sandler, A.H. Windle, C.A. Martin, M.K. Schwarz, W. Bauhofer, K. Schulte, M.S.P. Shaffer: Percolation in Multi-Wall Carbon Nanotube-Epoxy composites ¿ Influence of processing parameters, nanotube aspect ratio and electric fields on the bulk conductivity. Mat. Res. Soc. Symp. Proc. Vol. 788, MRS, Boston, USA, 2004, pp. L2.10.1-6
  • 5-09.213V
    L.A.S.de A. Prado, C.S. Karthikeyan, S.S. Funari, K. Schulte, R. Willumeit, I.L. de Torriani, S.P. Nunes: Small-Angle X-Ray Scattering Studies on SPEEK Silylated Sinthethic Layered Silicate Composites for direct Methanol fuel Cells. SLAP 2004, Valencia, Spain, July 11 ¿16, 2004
  • 5-09.214V
    L.A.S. de A. Prado, Y.A. Gallego, G. Goerigk, K. Schulte, R. Willumeit, J. de Abajo, S.P. Nunes: Sulfonated Block copolyimides for Direct-Methanol Fuel Cells: Analysis of the Clustering of Ionic Groups by Anomalous Small-Angle X-Ray Scattering. SLAP 2004, Valencia, Spain, July 11 ¿16, 2004
  • 5-09.215V
    L.A.S. de A. Prado, C.S. Karthikeyan, I.L. de Torriani, K. Schulte, S.P. Nunes: Poly(benzlimidazole)Layered Silicate Nanocomposties: Preparation, Silicate Exfoliation and Vapor-Barrier Properties. 20th General Conference of the CMD of European Physical Society, July 19 ¿ 23, 2004
  • 5-09.216V
    M. Shaffer, J. Elliott, S. Rahatekar, A. Windle, J. Sandler, K. Schulte, C.A. Martin, W. Bauhofer: Achieving electrical percolation in polymer-carbon nanotube composites. Nanotube04, Mexico, 2004
  • 5-09.217V
    G. Broza, F.H. Gojny, W. Bauhofer, T.A. Ezquerra, I.A. Kinloch, K. Schulte: Development of electrically conductive carbon nanotube composite with polymer matrix. III Scientific-Technical Conference ¿Advance in Petroleum and Gas Industry and Petrochemistry¿, Lviv Conference, Ukraine, Sept. 2004
  • 5-09.218V
    T. Hobbiebrunken, B. Fiedler, M. Hojo, M. Tanaka, S. Ochiai, K. Schulte: Microscopic yielding and failure behavior of CF/epoxy composites. RIAM Symposium, Mechanical Modelling and Damage of composite Materials, Kyushu University, Kasuga, Fukuoka, Japan, March 7-9, 2004, pp. 7-10.
  • 5-09.219V
    T. Hobbiebrunken, B. Fiedler, M. Hojo, M. Tanaka, S. Ochiai, K. Schulte: Micromechanical yielding and failure of CF/epoxy caused by the formation of residual stresses under macroscopic boundary conditions. ECCM-11, Proceedings of ECCM 11, Rhodes, 2004
  • 5-09.220V
    F.H. Gojny, B. Fiedler, M.H.G. Wichmann, K. Schulte: Carbon Nanotube-reinforced epoxy-composites ¿ Enhanced stiffness and fracture toughness at low nanotube content. E-MRS 2004 Meeting, Strasbourg, France, 2004
  • 5-09.221V
    A. Gagel, B. Fiedler, K. Schulte: On medelling the mechanical degradation of fatigue loaded glass-fibre non-crimped-fabric reinforced epoxy. 9th Euro-Japan Symposium on Composite Materials, Hamburg, Germany, May 25-28, 2004
  • 5-09.222V
    T. Hobbiebrunken, M. Hojo, M. Tanaka, B. Fiedler: Evaluation of interfacial strength in CF/epoxies using FEM and in-situ observations. 11th US-Japan Conference on Composite Materials, Yamagata University, Unesawa, Japan, 2004
  • 5-09.223V
    S. Hinz, K. Schulte: Damage evaluation of Glare® 4B under interlaminar shear loading at elevated temperatures. 11th European Conference on composite materials (ECCM10), Brugge, Belgium, June 3 ¿ 7, 2004, book of abstracs
  • 5-09.224V
    S. Hinz, K. Schulte: Damage evaluation of Glare® 4B under interlaminar shear loading at different temperature conditions. 11th European Conference on composite materials (ECCM11), Rhodes, Greece, May 31 ¿ June 3, 2004, full article on CD-ROM
  • 5-09.225V
    F.H. Gojny, M.H.G. Wichmann, B. Fedler, K. Schulte: Evaluation of the potential of carbon nanotubes AS reinforcement of an epoxy matrix and ist application to fibre reinforced polymers. ECCM 11-Proceeding 2004, Rhodes, Greece
  • 5-09.226V
    M.S.P. Shaffer, J.K.W. Sandler, S. Pegel, A.H. Windle, F. Gojny, K. Schulte, M. Cadek, W.J. Blau, J. Lohmar, M. van Es: Nanotube- and nanofibre-reinforced polyamide-12 fibres. MRS-Proceeding, Mat.Res. Soc. Symp. 791 (Q10.4) Boston, USA, 2004
  • 5-09.227V
    S. Hinz, K. Schulte: Investigation of interlaminar shear behaviour of Glare® 4B at elevated temperatures. 9th European/Japanese Symposium on composite Materials (EJSCM 9), Hamburg, Germany, May 25 ¿ 28, 2004, Poster Session
  • 5-09.228V
    S. Hinz, K. Schulte: Einfluss von Temperatur auf Verformung und Schädigung von faserverstärkten Metalllaminaten unter interlaminarer Schubbeanspruchung. Werkstoffwoche 2004, Kongress für innovative Werkstoffe, Verfahren und Anwendungen, München, Deutschland, 21.-23. Sept. 2004, Abstract unter: http://www.materialsweek.org/
  • 5-09.229V
    Nadia M. Jose and L. A. S. de A. Prado: Organic-Inorganic HybridMaterials: Synthesis and Selected Applications. Quimica Nova 28 (2005) 281
  • 5-09.230V
    F.H. Gojny, M.H.G. Wichmann, B. Fiedler, K. SchulteInfluence of different carbon nanotubes on the mechanical properties of epoxy matrix composites ¿ A comparative study.Composites Science and Technology 65 (2005) pp. 2300-2313
  • 5-09.231V
    T. Hobbiebrunken, B. Fiedler, M. Hojo, S. Ochiai, K. SchulteMicroscopic yielding of CF/epoxy composites and the effect on the formation of thermal residual stresses. Composites Science and Technology 65 (2005) pp. 1626-1635
  • 5-09.232V
    B. Fiedler, S. Ochiai, K. SchulteModelling composite strength considering fibre and interfacial properties, residual stresses and temperature; in Multi-Scale Modelling of Composite Material Systems ¿ the Art of Predictive Damage Modelling. Editor: C. Soutis, Woodhead Publishing Ltd., Cambridge, U.K., ISBN 1 85573 936 4 (2005) pp. 99-123
  • 5-09.233V
    L.A.S. de A. Prado, M.L. Ponce, S.S. Funari, V.M. Garamus, R. Willumeit, K. Schulte, H. Wittich, S.P. NunesSAXS/WAXS characterization of proton-conducting polymer membranes containing phosphomolybdic acid. J. Non-Cryst. Solids 351 (2005) pp. 2194-2199
  • 5-09.234V
    K. Schulte, F.H. Gojny, B. Fiedler, J.K.W. Sandler, W. BauhoferCarbon nanotube-reinforced polymers: a state of the art review.In Polymer Composites ¿ From Nano to Macro Scale, Editors: K. Friedrich, S. Fakirov, Z. Zhang, Springer-Verlag ISBN: 0-387-24176-0 (2005) pp. 3-23
  • 5-09.235V
    J.D. Fidelus, E. Wiesel, F.H. Gojny, K. Schulte, H.D. WagnerThermo-mechanical properties of randomly oriented carbon/epoxy nanocompositesComposites A ¿ Applied Science and Manufacturing 36 (2005) pp. 1555-1561
  • 5-09.236V
    G. Broza, Z. Roslaniec, K. SchulteProcessing and assessment of poly(butylene terephtalate) nanocomposites reinforced with oxidized single wall carbon nanotubes. Polymer 46 (2005) pp. 5860-5867
  • 5-09.237V
    S. Hinz, J. Heidemann, K. SchulteDamage evaluation of Glare® 4B under interlaminar shear loading at different temperature conditions. Advanced Composite Letters 14 (2) (2005) pp. 47-55
  • 5-09.238V
    C.S. Karthikeyan, S.P. Nunes, L.A.S.A. Prado, M.L. Ponce, B. Ruffmann, K. SchultePolymer nanocomposite membranes for DMFC application. J. Membr. Sci. 254 (2005) pp. 139-146
  • 5-09.239V
    C.S. Karthikeyan, S.P. Nunes, K. SchulteIonomer-silicates composite membranes: Permeability and conductivity studies. European Polymer Journal, 41 (2005) pp. 1350-1356
  • 5-09.240V
    G. Broza, V.M. Castaňo, G. Martinez-Barrera, K.P. Menard, C. SimõesP-V-T properties of a polymer liquid crystal subjected to pre-drawing at several temperatures. Physica B 357 (2005), pp. 500-506
  • 5-09.241V
    C.A. Martin, J.K.W. Sandler, A.H. Windle, M.S.P. Shaffer, K. Schulte, M.-K. Schwarz, W. BauhoferElectric field-induced aligned multi-wall carbon nanotube networks in epoxy composites. Polymer 46 (2005) pp. 877-886
  • 5-09.242V
    B. Fiedler, A. Gagel, T. Hobbiebrunken, M. Hojo, K. Schulte, S. Ochiai,Modelling of the transverse strength of fibre reinforced epoxy composite atlow and high temperature. Composite Interfaces, Vol. 12, No. 3-4, (2005) pp. 379-394
  • 5-09.243V
    L.A.S. de A. Prado, C.S. Karthikeyan, K. Schulte, S.P. NunesOrganic modification of layered silicates: Structural and thermal characterisations. J. Non-Crystalline Solids 351 (2005) pp. 970-975
  • 5-09.244V
    K. Wiemann, W. Kaminsky, F.H. Gojny,K. SchulteSynthesis and properties of syn-diotactic poly(propylene)/carbon nanofiber and nanotube composites prepared by in situ polymerization with metallocene/MAO catalysts. J. of Macromolecular Chemistry and Physics 206 (2005) , pp. 1472-1478
  • 5-09.245V
    K. Schulte, M.C.M. NolteCarbon nanotube and carbon nanofiber-reinforced polymer compositesMechanical Properties of Polymers Based on Nanostructure and Morphology, In: Mechanical Properties of Polymers Based on Nanostructure and Morphology,Editors: G.H. Michler, F.J. Baltá-Calleja , CRC Taylor & Franceis, Boca Raton, (2005) pp. 603-628
  • 5-09.246V
    G. Broza, M. Kwiatkowska, Z. Roslaniec, K. SchulteProcessing and assessment of poly(butylenes terephthalate) nanocomposites reinforced with oxidizes single wall carbon nanotubes. Polymer 46 (2005) pp. 5860-5867
  • 5-09.247V
    F.H. Gojny, M.H.G. Wichmann, B. Fiedler, W. Bauhofer, K. SchulteInfluence of nano-modification on the mechanical and electrical properties of conventional fibre-reinforced composites. Composites: Part A 36 (2005) pp. 1525-1535
  • 5-09.248V
    K. Schulte. B. FiedlerStructure and Properties of Composite Materials, 2nd. Edition, TuTech Innovation, ISBN 3-930400-53-7, Hamburg 2005
  • 5-09.249V
    Hinz, B. Fiedler, J. Heidemann, K. SchulteMeso-micro modelling of interlaminar shear deformation of Glare®4B at elevated temperatures. Deformation and fracture of composites (DFC-08), Sheffield, U.K., April 3 ¿ 6, 2005, book of abstracts
  • 5-09.250V
    L. O. Meyer, P. Bartels, B. Fiedler, K. Schulte, H. AhlbornA practical solution for substantial recycling of carbon fibre reinforced composites. EcoComp 2005, Stockholm, June 20 ¿ 21, 2005, book of abstracts, full article on CD-ROM
  • 5-09.251V
    F.H. Gojny, M.H.G. Wichmann, B. Fiedler, K. SchulteCritical consideration of the potential of carbon nanotubes as structural modifiers for epoxy matrix composites. Nanocomposites 2005, 28.-30.09.2005, Montreal, Canada
  • 5-09.252V
    Kirsten Prehn, Suzana P. Nunes, Karl Schulte:Application of Carbon Nanotube/Polymer Composites as Electrode for Polyelectrolyte Membrane Fuel Cells, MRS Fall Meeting, Nov 28.- Dec.2. Symposium A, A3.5, Boston, USA (2005)
  • 5-09.253V
    M.H.G. Wichmann, F.H. Gojny, J. Sumfleth, B. Fiedler, K. Schulte Production and properties of glass fibre-reinforced polymer composites with nanoparticle modified epoxy matrix, MRS Fall Meeting, Nov 28.- Dec.2. Boston, USA (2005)
  • 5-09.254V
    F.H. Gojny, M.H.G. Wichmann, B. Fiedler, K. SchulteNanoverstärkte Polymercomposites ¿ Entwicklung multi-funktioneller Werkstoffe auf Basis von Carbon Nanotubes (-fibres). Anwender Seminar TA-Instruments 2005 (27.-28.01.2005 in Würzburg): Highlights der thermischen Analyse, Hrsg. Wolfgang Kunze (2005)

Patente

  • 5-09.012P
    Vorrichtung und Verfahren zur Herstellung von KunststoffteilenP 44 41 815.9-16, erteilt am 10.02.1997
  • 5-09.013P
    Handlauf für FahrtreppenP. 6072 197 42 258.6, erteilt am 2.10.1999
  • 5-09.014P
    Tibiale Komponente einer Knieendoprothese mit graduiertem WerkstoffaufbauP 100 51 437 5
  • 5-09.015P
    Tibiale Komponente einer Knieendoprothese mit dreidimensional faserverstärkter Struktur.P 100 51 438 3
TU Hamburg
Technische Universität
Hamburg (TU Hamburg)
Am Schwarzenberg-Campus 1
21073 Hamburg
Weiterführende Links
Impressum
Datenschutz
Barrierefreiheit
Kontakt
Anfahrt
Medien und Presse
Weltoffene Hochschule
Familienfreundliche Hochschule
BMWi
Exist
ESF
EU