Forschungsbericht 2006

5-10 Biomechanik

Denickestraße 15
21079 Hamburg

Tel.: 040 / 42878 - 3253
Fax: 040 / 42878 - 2996

e-mail: macsek@tu-harburg.de
www: http://www.tu-harburg.de/bim/

Professoren
Prof. Dr. habil. Michael Morlock Ph.D. (Leitung)	(TUHH)
Prof. Dr. rer. nat. Eva Maria Eisenbarth	(TUHH)
Sekretariat
Gabriele Lange	(TUHH)
Helga Richter	(TUHH)
wissenschaftliche Mitarbeiter/innen
Dr.-Ing. Nick Bishop	(TUHH)
Dipl.-Ing. Anne Gebert	(TUHH)
Dipl.-Ing. Arne Hothan	(TUHH)
Dr.-Ing. Gerd Huber	(TUHH)
Dipl.-Ing. Helge Paetzold	(TUHH)
Dipl.-Ing. Stephan Rothstock	(TUHH)
M. Sc. Daniel Skrzypiec	(TUHH)
sonstige Mitarbeiter/innen
Dipl.-Ing. Andrea Bluhm	(TUHH)
Dipl.-Lm.-Chem. Gabriela Mielke	(TUHH)
Dipl.-Ing. Kay Sellenschloh	(TUHH)
Dipl.-Ing. Matthias Vollmer	(TUHH)

 

 

Kooperationen

• AO Forschungsinstitut Davos, Schweiz
• Aesculap
• Asklepios Klinik Altona
• Asklepios Klinik Harburg
• Asklepios Klinik St. Georg
• BSN medical GmbH & Co. KG
• Berufsgenossenschaftliches Unfallkrankenhaus Hamburg
• Biomet
• Bode - Stiftung
• Bundesanstalt für Arbeitsschutz und Arbeitsmedizin
• DePuy
• Department of Orthopedic Surgery, Rush Presbyterian St. Luke's Medical Center, Chicago
• Deutsche Sporthochschule Köln
• Dr.h.c. Robert Mathys Stiftung
• ENDO-Klinik Hamburg
• ESKA Implants
• Fraunhofer Institut für Schicht- & Oberflächentechnik, Braunschweig
• GKSS
• Klinikum Eilbek
• Litos Gmbh & Co. KG
• Smith & Nephew
• Stryker Howmedica
• TU Kaiserslautern
• Universität Hannover
• Universität des Saarlandes
• Universitätsklinikum Hamburg-Eppendorf (UKE)
• Vascutek
• Waldemar LINK GmbH & Co. KG
• Zimmer

 

Publikationen

Veröffentlichungen

• 5-10.001V
  Götzen, N., Nassutt, R., Lampe, F. and Morlock, M. (2005), Load-shift - numerical evaluation of a new design philosophy for uncemented hip prostheses. Journal of Biomechanics 38(3):595-604.
• 5-10.001V
  Honl, Matthias (2005) Orthopädische Trennverfahren unter besonderer Berücksichtigung des Strahlschneidens. Habilitation. Technische Universität Hamburg-Harburg.
• 5-10.002V
  Seebeck J., Goldhahn J., Morlock M., Schneider E. (2005), Mechanical Behaviour of Screws in Normal and Osteoporotic Bone. Osteoporosis International 16 Suppl 2:S107-11.
• 5-10.003V
  Nagel-Heyer S., Goepfert C., Morlock M. and Pörtner, R. (2005), Relationship between gross morphological and biochemical data of tissue engineered cartilage-carrier-constructs. Biotechnology Letters (27):187-192.
• 5-10.004V
  Huber, G., Paetzold, H., Püschel, K., Morlock, M. (2005), Verhalten von Wirbelsäulensegmenten bei dynamischer Belastung. Schriftenreihe der Bundesanstalt für Arbeitsschutz und Arbeitsmedizin, Fb 1062, Wirtschaftsverlag, Dresden.
• 5-10.005V
  Honl M, Schwieger K, Gauck CH, Lampe F, Morlock MM, Wimmer MA, Hille E. (2005), Comparison of total hip replacements cup orientation and position using different navigation systems and the conventional manual technique. Orthopäde 34(11):1131-6.
• 5-10.006V
  Morlock, M., Bishop, N. (2005), The bigger the better - Tribologie aus der Sicht des Großkopfes. Orthopaedic Dimensions 2 / 2005, p. 16-18.
• 5-10.007V
  Morlock, M. (2005), Editorial. Clinical Biomechanics 20(9):S1.
• 5-10.008V
  Morlock, M., Spears, I., Pfleiderer, M., Schneider, E. (2005), Micromotion at the bone-implant interface. Proceedings of the 1st GAMM Seminar on Continuum Biomechanics. Editors. W. Ehlers B. Markert. Report No. II-14, Glückauf Verlag, Essen, p.99-108.
• 5-10.009V
  Jin, Z., Meakins, S., Morlock, M., Parsons, P., Hardaker, C., Flett, M., Isaac, G. (2006), Deformation of press-fitted metallic resurfacing cups. Part 1: experimental simulation. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Volume 220, Number 2, p. 299-309.
• 5-10.010V
  Yew, A., Jin, Z., Donn, A., Morlock, M., Isaac, G. (2006), Deformation of press-fitted metallic resurfacing cups. Part 2: finite element simulation. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Volume 220, Number 2, p. 311-319.
• 5-10.011V
  Morlock, M., Bishop, N., Rüther, W., Delling, G., Hahn, M. (2006), Biomechanical, morphological and histological analysis of early failures in hip resurfacing arthroplasty. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Volume 220, Number 2, p 333-344.
• 5-10.012V
  Siebel, Th., Maubach, S., Morlock, M. (2006), Lessons Learned from Early Clinical Experience and Results of 300 ASRR Hip Resurfacing Implantations. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Volume 220, Number 2, p 345-353.
• 5-10.013V
  Jeffers, J.R.T., Westphal, F.M., Morlock, M.M., Taylor, M., The relationship between the initial mechanical environment and migration in cementless hip arthroplasty: computational and experimental testing. Journal of Orthopaedic Research (submitted)
• 5-10.014V
  Klestil, T., Morlock, M., Schwieger, K., Sellenschloh, K., Curda, B., Biedermann, R., Hennerbichler, A., Schmoelz, W., Rabl, W., Blauth, M. (2006), Migration of Two Different Cementless Hip Arthoplasty Stems in Combination with Two Different Facture Heads - a Biomechanical in vitro Study, Arch Orthop Trauma Surg. 2006 Mar.
• 5-10.015V
  Grant, J., Bishop, N., Götzen, N., Sprecher, Ch., Honl, M., Morlock, M. (2006), Artifical composite bone as a model of human trabecular bone: The Implantbone interface, Journal of Biomechanics Jun 26, [Epub ahead of print].
• 5-10.016V
  Westphal, F., Bishop, N., Püschel, K., Morlock, M. (2006), Biomechanics of a new short-stemmed uncemented Hip Prothesis - an in-vitro study in human bone, Clin Biomech 21(8):834-40.
• 5-10.017V
  Westphal, F., Bishop, N., Honl, M., Hille, E., Püschel, K., Morlock, M. (2006), Migration and cyclic motion of a new short-stemmed Hip Prothesis - a biomechanical in-vitro Study, Hip International, Vol. 16 S-3, p. 22-29, 2006.
• 5-10.018V
  Mischke, Ch., Huber, G., Morlock, M.,Wölfel, H. (2006), Validating a numerical model of the lumbar spine with in vitro experiments, Journal of Sound and Vibration (submitted).
• 5-10.019V
  Morlock, M. (2006), Die Biomechanik des Fußes, Wintertagung der österreichischen Gesellschaft für Fußchirurgie, Wien, Jatros Orthoädie, Vol. 11, Nr. 1, p. 12-14, 2006.
• 5-10.020V
  Morlock, M. (2006), Gleitpaarung heute und morgen, MedReport, Nr. 19, Vol. 30, S. 5, 2006.
• 5-10.021V
  Honl, M., Schwieger, K., Schwenke, T., Morlock, M., Wimmer, M. (2006), Plain and Abrasive Water Jet Cutting- A new method in Joint Cartilage Repair, submitted
• 5-10.022V
  Honl, M., Schwieger, K., Salineros, M., Jacobs, J., Morlock, M., Wimmer, M. (2006), Orientation of the acetabular component: a comparison of five navigation systems with conventional surgical technique, JBJS-Br, Vol. 88 Nr. 10, p. 1401-1405, 2006.
• 5-10.023V
  Huber, G., Morlock, M.M., Ito, K. (2006), Consistent hydration of intervertebral discs during in vitro testing, Medical Engineering & Physics (accepted).
• 5-10.024V
  Morlock, M., Rüther, W., Hahn, M., Delling, G. (2006), Wunsch und Wirklichkeit - Tribologie und Implantationstechnik des Oberflächenersatzes, Orthopädie im Profil, Vol. 2, Nr. 1, S. 16-17, 2006.
• 5-10.025V
  Morlock, M. (2005), Micromotion at the bone-implant interface. Abstract book, 1st GAMM Seminar on Continuum Biomechanics, p. 13-14, Freudenstadt.
• 5-10.026V
  Gebert, A., Stampe, M., Drösser, Th., Wintzer, Ch., Püschel, K., Imig, H., Morlock, M. (2005), Migrationsverhalten von Stentprothesen. Jahrestagung der DGfB, Hamburg, p. 54.
• 5-10.027V
  Götzen, N., Gbara, A., Flinzberg, S., Morlock, M. (2005), Winkelstabile Ostesynthesesysteme bei der Versorgung von Unterkiefer- und Mittelgesichtsfrakturen - numerische Untersuchungen zur Primärstabiltät, Jahrestagung der DGfB, Hamburg, p. 71.
• 5-10.028V
  Götzen, N., Kummer, T., Schilling, A., Amling, M., Morlock, M. (2005), Die Maus als Modellorganismus für humane Skeletterkrankungen - eine biomechanische Studie. Jahrestagung der DGfB, Hamburg, p. 21.
• 5-10.029V
  Wintzer, Ch., Gebert, A., Debus, S., Imig, H., Morlock, M. (2005); Abdichtung von Stentgraftprothesen. Jahrestagung der DGfB, Hamburg, p. 45.
• 5-10.030V
  Westphal, F. Bishop, N., Vollmer, M., Sellenschloh, K., Püschel, K., Morlock, M. (2006), Vergleich der Primärstabilität zwischen einer metaphysär verankerten Hüft- und herkömmlichen Schraftprotheses. Jahrestagung der DGfB, Hamburg, p. 44.
• 5-10.031V
  Weichert, H., Gebert, A., Kortmann, H., Morlock, M. (2005), Zugbelastung der End-zu-Seit Anastomose im PTFE-Modell unter Variation der Arteriotomieform. Jahrestagung der DGfB, Hamburg, p. 175.
• 5-10.032V
  Seebeck, J., Duda, G., Morlock, M., Schneider, E. (2005), Osteosynthese proximaler Tibiafrakturen durch einen internen Fixateur unter Berücksichtigung individueller Knochenqualitäten. Jahrestagung der DGfB, Hamburg, p. 63.
• 5-10.033V
  Götzen, N., Windolf, M., Morlock, M. (2005), Die Genauigkeit des Vicon® Motion-Analysis-Systems - experimentelle Analyse unter Einsatz eines Kalibrier- und Messroboters. Jahrestagung der DGfB, Hamburg, p. 91.
• 5-10.034V
  Lechert, B.,Götzen, N., Morlock, M., Wening, J.V. (2005) Proximal verriegelte Hüftendoprothes zur Versorgung von medialen Schenkelhalsfrakturen bei geriatrischen Patienten. Jahrestagung der DGfB, Hamburg, p. 145.
• 5-10.035V
  Morlock, M., Westphal, F. (2005), Primary stability of a new short stemmed prosthesis. 18th bi-annual Congress of the South-African Arthroplasty Society, p. 16.
• 5-10.036V
  Morlock, M., Meakins, S., Parsons, P., Hardaker, C., Flett, M., Isaac, G., Jin Z. (2005), Optimizing the acetabular cup of a hip surface replacement implant. 18th bi-annual Congress of the South-African Arthroplasty Society, p. 49.
• 5-10.037V
  Morlock, M., Rüther, W., Hahn, M., Delling, G. (2005), Biomechanical and Histo-Morphological Analysis of Early Failed Hip Resurfacing Implants. Emerging Orthopaedic Technologies: Where Surgeons & Scientist Meet, Flims, p.68-69.
• 5-10.038V
  Westphal, F., Morlock, M. (2005), Migration and relative motion of a new short-stemmed hip prosthesis in comparison with a standard shaft prosthesis. EORS 2005 Lissabon, p. 412.
• 5-10.039V
  Gebauer, M., Götzen, N., Morlock, M., Püschel, K., Rueger, J., Amling, M. (2005), Biomechanische Analyse humaner Atlasfrakturen. DGU/DGOOC Berlin 2005, M13-1092.
• 5-10.040V
  Gebert, A., Imig, H., Morlock, M. (2005), New Technologies in vascular biomaterials-fundametals about stents. Abstracts of free communications, 4th Symposium of Vascular Biometrials, Strasbourg, May 11-13, p. S1.
• 5-10.041V
  Peters, J., Gebert, A., Götzen, N., Westphal, F., Morlock, M. (2005), Pressfit als Fixationsmöglichkeit für den femoralen Oberflächenersatz. Abstracts der Konferenz "Innovative Medizin- und Biotechnologie" in Hamburg, p. 42.
• 5-10.042V
  Wenzl, M., Seide, K., Morlock, M., Püschel, K., Wolter, D. (2005), The importance of a locked screw-plate interface in osteosynthesis of the tibial head - a bio-mechanical study. Book of Abstracts, Osteosynthese International 2005, p. 105.
• 5-10.043V
  Lechert, B., Götzen, N., Stegmann, J., Wening, J., Morlock, M., Püschel, K. (2005), Certified implant failure - biomechanics and clinical follow up on the fixion PF nail for the treatment of fractures of the proximal femur. Book of Abstracts, Osteosynthese International 2005, p. 105.
• 5-10.044V
  Morlock, M., Bishop, N., Schönwald, M., Katzer, A., Seibel, O., Püschel, K. (2005), Analysis of a large random sample of post mortem retrieved cemented femoral hip implants. ISALM 2005, Rechtsmedizin 15 (4), p. 288.
• 5-10.045V
  Morlock, M., Rüther, W., Hahn, M., Delling, G. (2005), Tribologie und Zementiertechnik des Oberflächenersatzes - Wunsch und Wirklichkeit. Minimal invasive Endoprothetik: Kein kurzzeitiger Modetrend, 3. Kölner Kongress, Klinik und Poliklinik für Orthopädie, Köln, p.7-9.
• 5-10.046V
  Morlock, M. (2005), Tissue Engineering of Articula Cartilage- The Hamburg Situation. Forum innovative Therapies, Hamburg, p. 1.
• 5-10.047V
  Morlock, M., Rüther, W., Hahn, M., Delling, G. (2005), Biomechanical and Histo-Morphological Analysis of Early Failed Hip Resurfacing Implants. International Symposium "Resurfacing of the Hip Joint". An Update, Zürich, April 21-22, 2005. Osteologie (14), Nr. 2, p.36-38.
• 5-10.048V
  Carrero, V., Betthäuser, A., Morlock, M., Hille, E., Honl, M. (2005), Fixation Methods for BTB-grafts used in ACL reconstruction - a dynamic in-vitro test, Abstraktband 54. Jahrestagung NOV 2005, Hamburg, P30.
• 5-10.049V
  Lechert, B., Götzen, N., Stegmann, J., Wening, J.V., Morlock, M., Püschel, K. (2005), Certified Implant Failure - biomechanical and clinical follow up on the fixion PF nail for the treatment of fractures of the proximal femure, Osteosynthese International, Hamburg, O77.
• 5-10.050V
  Wenzl, M., Seide, K., Morlock, M., Püschel, K., Wolter, D. (2005), The importance of a locked screw-plate interface in osteosynthesis of the tibial head - a biomechanical study, Osteosynthese International, Hamburg, O104.
• 5-10.051V
  Gebert, A., Peters, J., Westphal, F., Morlock, M. (2006), Nominal versus actual press fit fixation of a femoral resurfacing implant - an experimental and computational evaluation. ORS San Francisco 2006, p. 677.
• 5-10.052V
  Westphal, F., Bishop, N., Honl, M., Morlock, M. (2006) Primary stability of a new short-stemmed uncemented hip prosthesis - a biomechanical in-vitro study. ORS San Francisco 2006, p. 480.
• 5-10.053V
  Paetzold, H., Huber, G., Morlock, M. (2006), The influence of dynamic load level and loading amplitude on the creep behavior of functional lumbar spinal units. ORS San Francisco 2006, p. 1222.
• 5-10.054V
  Honl, M., Schwieger, K., Morlock, M, Schwenke, T., Jacobs, J., Wimmer, M. (2006), The medial approach in primary total hip replacement surgery, a microinvasive single incision technique in a prospective study. ORS San Francisco 2006, p. 449.
• 5-10.055V
  Honl, M., Carrero, V., Kemnitz, M., Morlock, M, Schwenke, T., Wimmer, M. (2006), Bone-patellartendon-bone grafts for ACL reconstruction under static and dynamic loading conditions. ORS San Francisco 2006, p. 1148.0
• 5-10.056V
  Müller-Bergen, L., Eggers, C., Huber, G., Morlock, M. (2006), Erzeugung von reproduzierbaren Frakturen in mehrsegmentalen Wirbelsäulenabschnitten. DGU Berlin 2006
• 5-10.057V
  Gradl, G., Seetz, C., Morlock, M., Sellenschloh, K., Mittlmeier, T. (2006), Anatomische und biomechanische Evaluation eines neuen minimal invasiven Plattensystems zur winkelstabilen Osteosynthese proximaler Humerusfrakturen. DGU Berlin 2006
• 5-10.058V
  Rikli, D., Babst, R., Honigmann, P., Morlock, M., Mittlmeier, T. (2006), In vivo Kraftübertragung im radio-ulno-carpalen Gelenk unter physiologischen Bedingungen. DGU Berlin 2006
• 5-10.059V
  Jurda, T., Wening, V., Morlock, M., Püschel, K.(2006), Schulter: Frakturen und Rotatorenmanschette. DGU Berlin 2006
• 5-10.060V
  Morlock, M., Delling, G., Rüther, W., Hahn, M., Bishop, N. (2006), Abrieb von Metall-Metall Oberflächenersatzprothesen im Hüftgelenk - Analyse von 90 Revisionspräparaten. DGU Berlin 2006
• 5-10.061V
  Gebert, A., Imig, H., Morlock, M. (2006), Investigation of factors influencing the migration of stent-grafts. 5th World Congress of Biomechanics, München 2006
• 5-10.062V
  Morlock, M., Delling, G., Rüther, W., Hahn, M., Bishop, N. (2006), In-vivo wear of hip surface replacements - a comparison of retrievals and simulator results. 5th World Congress of Biomechanics, München 2006
• 5-10.063V
  Ilinich, E., Böer, R., Eisenbarth, E., Goepfert, C., Pörtner, R., Morlock, M., Schulte, K. (2006), Biomechanical and biochemical properties of native and in vitro porcine cartilage, a new bioreactor for the cultivation of cartilage with realistic joint loading. 5th World Congress of Biomechanics, München 2006
• 5-10.064V
  Götzen, N., Kummer, T., Schilling, A., Amling, M., Morlock, M.M. (2006), Integrated phenotypical characterization of murine vertebral bone. 5th World Congress of Biomechanics, München 2006
• 5-10.065V
  Krug, F., Reinecke, S., Oldenburg, G.v., Morlock, M. (2006), The pelvis compression fixator. 5th World Congress of Biomechanics, München 2006
• 5-10.066V
  Mischke, C., Huber, G., Morlock, M.M., Wölfel, H.P. (2006), The influence of individual geometry on the results of a numerical model of the lumbar spine - Experimental data and simulation. 5th World Congress of Biomechanics, München 2006
• 5-10.067V
  G. Huber, G., Müller-Bergen, L., Heinze, J., Eggers, C., Püschel, K., Morlock, M.M. (2006), Mechanical stability of augmented spinal segments. 5th World Congress of Biomechanics, München 2006
• 5-10.068V
  N.E. Bishop, N. E., Klein, A., Schönwald, M., Hahn, M., Püschel, K., Morlock, M. M. (2006), Assessment of the implant-bone interface in 38 post mortem retrieved femoral components. 5th World Congress of Biomechanics, München 2006
• 5-10.069V
  Götzen, N., Kummer, T., Schilling, A., Amling, M., Morlock, M.M. (2006), Novel Phenotypic Characterization of the Mouse Skeleton. GAMM 2006, Berlin, Germany.
• 5-10.070V
  Morlock, M. (2006), Resurfacing and Bone conserving THA - Scientific basis of Hip resurfacing. APAS, Shanghai.
• 5-10.071V
  Morlock, M. (2006), Acetabular biomechanics. APAS, Shanghai.
• 5-10.072V
  Morlock, M. (2006), Results of retrieval studies. APAS, Shanghai.
• 5-10.073V
  Morlock, M. (2006), Science in Arthroplasty I - all about the articulation - Lubrication in Arthroplasty . APAS, Shanghai.
• 5-10.074V
  Kleber, R., Maubach, S., Jung, A., Morlock, M., Siebel, Th. (2006), Erste Erfahrungen und klinischen Ergebnissen 2 Jahre nach Oberflächernersatzprothese Typ ASR Abstraktband, 55. Jahrestagung des NOV, Hamburg, S. 25.
• 5-10.075V
  Pörtner, R., Wiegandt, K., Heyland, J., Goepfert, C., Nagel-Heyer, S., Schumacher, U., Morlock, M. (2006), Effect of intermittent loading on redifferentiation of chondrocytes and cartilage formation, Fit 2006, Sylt.
• 5-10.076V
  Velten, D., Eisenbarth,E., Schanne, N., Breme, J. (2005), Biomedical Oxide Coatings on Ti-alloys prepared by means of the Sol-Gel Process, Biomaterialien (6)1, 2005 : 22-28
• 5-10.077V
  Peters, K., Unger, R.E., Eisenbarth, E., Hoffmann, B., Detsch, R., Schäfer, J., Stumpf, S., Breme, J., Ziegler, G., Kirkpatrick, C.J. (2005), The Intercellular Contact as an Indicator for Compatibility of Biomaterials in Endothelial Cells. Biomaterialien 6 (1), 2005: 7-13
• 5-10.078V
  Eisenbarth, E. (2005), Nanotechnologically modified Biomaterials:Studienbrief Postgraduate Distance Studies "Nanobiotechnology",ZFUW, TU Kaiserslautern, April 2005
• 5-10.079V
  Eisenbarth, E., Velten, D., Breme, J., (2006), Biomimetic Implant Coatings. Biomolecular Engineering, Elsevier, Biomol Eng. 2006 Jun 6; [Epub ahead of print]
• 5-10.080V
  Eisenbarth, E., Velten, D., Müller, M., Thull, R., Breme, J. (2006), Nanostructured niobium oxide coatings influence osteoblast adhesion . J Biomed Mater Res A. 2006 Oct;79(1):166-75.
• 5-10.081V
  Hornez, N.C., Chai, F., Eisenbarth, E., Traisnel, M., Breme, J., Hildebrand, H. (2006), Cytocompatibility and bio-corrosion of implant alloys in different cell culture systems Biomaterialien 7 (2), 2006, 82-89

Dissertationen

• 5-10.001D
  Huber, Gerd (2006) Physiologische Bestimmung der mechanischen Eigenschaften von Bandscheiben. Dissertation. Technische Universität Hamburg-Harburg, (AB Zuverlässigkeitstechnik M-24).
• 5-10.002D
  Götzen, Nils (2006) Integrated Phenotypical Characterization of the Murine Skeleton. Dissertation. Technische Universität Hamburg-Harburg.
• 5-10.003D
  Bishop, Nicholas E. (2006) Mechanical Stimulation of Bone Healing. Dissertation. Technische Universität Hamburg-Harburg.