Forschungsbericht 2005

5-06 Werkstoffphysik und -technologie

Kooperationen

• AB Technische Keramik der TUHH
• DaimlerChrysler Forschungszentrum, Ulm
• Dornier Friedrichshafen
• GKSS-Forschungszentrum
• Gränges Technology Centre, Finspong, Schweden
• IKTS Dresden
• Inst. f. Metallkunde der Universität Stuttgart
• Institut für Gesteinshüttenkunde, Leoben
• Kyoto Institute of Technology
• Kyoto National University, Japan
• Los Alamos National Laboratory, NM, USA
• MPI Düsseldorf
• Plansee AG, Reutte i. Tirol
• SLV München
• Slowakische Akademie der Wissenschaften Kosice
• Swedish Institute for Metals Research (SIMR) Stockholm
• TU St. Petersburg
• Technische Fakultät, Universität Kiel
• Universidade Federal de Sao Carlos, Brasilien
• University of Limerick
• Universität Bayreuth
• Universität Grenoble, Frankreich
• Universität Münster
• Universität Rosario, Argentinien
• Universität der Bundeswehr Hamburg
• Volkswagen AG, Wolfsburg
• Yokohama National University, Japan

Publikationen

Veröffentlichungen

• 5-06.099V
  A. Bartels and H. Mecking: Research and Development of Titanium Aluminides in Germany". Proc. of the NATO Advanced Research Workshop Ordered Intermetallics - Physical Metallurgy and Mechanical Behaviour, C. T. Liu (Ed.), Kluwer Academic Publishers, NL 1992, pp. 663-678.
• 5-06.100V
  Ch. Hartig, X. F. Fang, H. Mecking and M. Dahms: Textures and Plastic Anisotrophy in (-TiAl". Acta Metall. et Mater. 40(1992), pp. 1883-1898.
• 5-06.101V
  M. Es-Souni, R. Wagner, P. A. Beaven and A. Bartels: Creep Behaviour of Dual Phase Intermetallics Based on (Ti,Nb)3(Al,Si) and (Ti,Nb)5(Al,Si)3". Mater. Sci. E. A153(1992), pp. 444-450".
• 5-06.102V
  W. Acchar und H. Hübner: Festigkeit und Kriechen von heißgepreßtem Siliziumnitrid (HPSN) mit SiC-Plättchen" (in portugiesisch), Ceramica 38, No. 256(1992), p. 100-104.
• 5-06.103V
  C. v. Minden und H. Hübner: Kriechverhalten von Zirkonoxid (TZP) verstärkt mit Aluminiumoxidplättchen. In: Verstärkung keramischer Werkstoffe, N. Claussen (Hrsg.), DGM-Informationsgesellschaft Verlag, Oberursel, 1992, S. 79-84.
• 5-06.104V
  C. Wolf und H. Hübner: Die Untersuchung des primären und stationären Kriechens glasphasenhaltiger keramischer Werkstoffe mit Hilfe des Spannungsrelaxationsversuches. Fortschrittsberichte der DKG Bd. 7(1992), H. 3, S. 242-256.
• 5-06.105V
  Y. Estrin and H. Mecking:A Remark in Connection with 'Direct Versus Indirect Dispersion Hardening. Scripta Metall. et Mater. 27(1992), pp.647-648.
• 5-06.106V
  G.-X. Wang, A. Bartels, M. Dahms: Temperature and Strain Rate Dependence of the Mechanical Properties of the EPM Alloy Ti-35wt.%Al". In The Processing, Properties and Applications of Metallic and Ceramic Materials", M. H. Lortto, D. J. Beevers (Eds.), Proc. Int. Conf. (Birmingham, UK 1992, Sept. 7-10), Vol. I, pp. 417-422.
• 5-06.107V
  J. Seeger and H. Mecking: Plane Strain Deformation Mechanism in Lamellar Ti-48at%Al". Scripta Metall. et Mater. 29(1993), pp. 13-18.
• 5-06.108V
  M. Es-Souni, M. Koeppe, A. Bartels, P. Beaven and R. Wagner: Microstructural Aspects of Creep in a TiAl-Base Alloy. Microstructural Science. 20(1993), pp.297-310.
• 5-06.109V
  A. Giese and Y. Estrin: Mechanical Behaviour and Microstructure of Fatigued Aluminium Single Crystals". Scripta Metall. et Mater. 28(1993), pp. 803-807.
• 5-06.110V
  Ch. Hartig, Hiroshi Fukutomi, H. Mecking and K. Aoki: Texture and Microstructure of Ti-49at%Al after Dynamic Recrystallization and Annealing". ISIJ Int. 33(1993), No. 2, pp. 313-320.
• 5-06.111V
  G.-X. Wang, A. Bartels and M. Dahms: Influence of Heat Treatment on Microstructure and Deformation Behaviour of the Alloy Ti50Al48Cr2 Prepared by Reactive Powder Processing". Mater. Trans., JIM, 34(1993), pp.228-235.
• 5-06.112V
  W. Schröer, C. Hartig, H. Mecking: Plasticity of DO3-ordered Fe-Al and Fe-Al-Si Single-crystals. Z. Metallk. 84(1993), pp.294-300.
• 5-06.113V
  C. Wolf and H. Hübner: Effect of Microstructure on the Creep Behaviour of a Vitreous-Bonded Alumina. In Euro-Ceramics II - Structural Ceramics and Composites, G. Ziegler and H. Hausner (Eds.), Deutsche Keramische Gesellschaft 1993, pp. 897-901.
• 5-06.114V
  C. v. Minden and H. Hübner: Creep of Tetragonal Zirconia Polycrystals (TZP) Reinforced by Alumina Platelets.In Euro-Ceramics II - Structural Ceramics and Composites, G. Ziegler and H. Hausner (Eds.), Deutsche Keramische Gesellschaft 1993, pp. 1553-1557.
• 5-06.115V
  W. Acchar, H. Hübner and C. Schubert: Creep of Hot-Pressed Silicon Nitride (HPSN) Reinforced by Silicon Carbide Platelets. In: Euro-Ceramics II - Structural Ceramics and Composites, G. Ziegler and H. Hausner (Eds.), Deutsche Keramische Gesellschaft 1993, pp. 1559-1563.
• 5-06.116V
  C. Wolf and H. Hübner: Creep Mechanisms in Alumina Containing a Glassy Grain-Boundary Phase. In: Third Euro-Ceramics - Engineering Ceramis, P. Duran and J. F. Fernandez (Eds.), Faenza Editrice Iberica 1993, Vol. 3, pp. 555-560.
• 5-06.117V
  C. Wolf, H. Hübner and J. Adler: Mechanical Behaviour of Pressureless Sintered SiC at High Temperature. In: Third Euro-Ceramics - Engineering Ceramis, P. Duran and J. F. Fernandez (Eds.), Faenza Editrice Iberica 1993, Vol. 3, pp. 465-470.
• 5-06.118V
  C. v. Minden and H. Hübner: Creep of Platelet-Reinforced Oxide Ceramics. In: Third Euro-Ceramics - Engineering Ceramis, P. Duran and J. F. Fernandez (Eds.), Faenza Editrice Iberica 1993, Vol. 3, pp. 671-676.
• 5-06.119V
  W. Acchar, A. Rendtel, H. Hübner:Improvements in the Creep Resistence of Hot-Pressed Silicon Nitride (HPSN). In:Third Euro-Ceramics - Engineering Ceramis. P. Duran and J. F. Fernandez (Eds.), Faenza Editrice Iberica 1993, Vol. 3, pp. 405-410 ".
• 5-06.120V
  H. Clemens, P. Schretter, K. Wurzwallner, A. Bartels and C. Koeppe: Forging and Rolling of Ti48Al2Cr Industrial Scale. In: Structural Intermetallics, R. Darolia et al. (Eds.), The Minerals, Metals & Materials Society, 1993, pp. 205-214.
• 5-06.121V
  M. Es-Souni, A. Bartels and R. Wagner:Creep Behavior of a Near (-TiAl Alloy Ti48Al2Cr,"Effect of Microstructure". In,""Structural Intermetallics", R. Darolia et al. (Eds.), The Minerals, Metals & Materials Society, 1993, pp. 335-344.
• 5-06.122V
  C. Koeppe, A. Bartels, J. Seeger and H. Mecking: General Aspects of the Thermomechanical Treatment of Two-Phase Intermetallic TiAl Compounds. Metall. Trans. 24A(1993), pp. 1795-1806.
• 5-06.123V
  H. Mecking, J. Seeger, Ch. Hartig, G. Frommeyer:Textures in Two Phase Intermetallic TiAl Alloys after Compression and Extrusion". ICOTOM 10 (Clausthal-Zellerfeld, Sept. 1993).
• 5-06.124V
  D. Dunst, R. Dendievel and H. Mecking: The Development of Deformation Textures as a Function of the Phase Fractions in two-Phase Titanium-Based Alloys. ICOTOM 10 (Clausthal-Zellerfeld, Sept. 1993).
• 5-06.125V
  A. Rendtel: High-Temperature Behaviour of Silicon Nitride Ceramics. CERAMICA 42, 1993, Polski Biuletyn Ceramiczny Nr. 4, pp.101-106.
• 5-06.126V
  A. Bartels, C. Koeppe, K. Wurzwallner, P. Schretter, H. Clemens: Microstructural and Mechanical Properties of TiAl-Alloys after Thermomecanical Processing. Proc. 13th Int. Plansee Seminar, R. Eck and H. Bildstein (Eds.), Metallwerke Plansee, Vol. 3(1993), pp. 564-577.
• 5-06.127V
  M. Es-Souni, A. Bartels and R. Wagner: Creep deformation and creep microstructures of a near (-TiAl Alloy Ti-48Al-2Cr. Mater. Sci. E. A171(1993), pp. 127-141.
• 5-06.128V
  M. Es-Souni, A. Bartels and R. Wagner: Creep Behaviour of a Fully Transformed Near (-TiAl alloy Ti-48Al-2Cr, Acta Metall. Mater 43 (1995) pp. 153-161.
• 5-06.129V
  H. Mecking and D. Dunst: Microstructural interactions during flow of two-phase titanium alloys. Mater. Sci. E. A175 (1994), pp. 55-62.
• 5-06.130V
  K. Wurzwallner, H. Clemens, P. Schretter, A. Bartels, C. Koeppe: Forming of Gamma-TiAl Alloys, In High-Temperature Ordered Intermetallic Alloys-V; MRS Vol. 288 (1993), pp. 867-872.
• 5-06.131V
  A. Bartels, J. Seeger, H. Mecking: Correlation of Strain Hardening and Creep Behaviour of Gamma-TiAl, In "High-Temperature Ordered Intermetallic Alloys-V; MRS Vol. 288 (1993), pp. 1179-1184.
• 5-06.132V
  Y. Estrin, and A. Giese: Steady State Behaviour of Alloy 800H Under Cyclic Deformation Scripta Metall. Mater., Vol. 29 (1993), pp.1223-1228.
• 5-06.133V
  Ch. Hartig and H. Mecking: Textures in Titanium Aluminides, Proc. 3rd. Japan. Intern. SAMPE, (1993), pp.1556-1563.
• 5-06.134V
  A. Rendtel, H. Hübner: Improvements in the Creep Strength of HPSN by Optimization of Additive Content and Thermal Treatment. In: SILICON NITRIDE 93, M. J. Hoffmann, P. F. Becher and G. Petzow (Eds.), Key Engineering Materials Vol. 89-91, Trans Tech Publications, Aedermannsdorf (Schweiz) 1994, pp. 593-597.
• 5-06.135V
  H. Fukutomi, K. Aoki, S. Takgi, M. Nobuki, H. Mecking & T. Kamijo: Formation of texture during high temperature deformation of Ti-50.3 mol.%Al. Intermetallics 2(1994),pp. 37-42.
• 5-06.136V
  A. Rendtel, W. Acchar und H. Hübner: Einfluß des Gefüges und einer Plättchenverstärkung auf das Kriechverhalten von Siliciumnitried-Werkstoffen, Fortschrittsberichte der DKG, Band 9, Heft 1, (1994) 7-21.
• 5-06.137V
  C. Wolf und H. Hübner: Gefügeabhängigkeit des Kriechverhaltens glasphasehaltiger Keramiken, Fortschrittsberichte der DKG, Band 9, Heft 1, (1994) 22-34.
• 5-06.138V
  W. Hermel, M. Herrmann, Chr. Schubert, H. Klemm, T. Millers, A. Rendtel: Micro-structure and Properties of SiCN-Nanocomposites. In: Structure and Properties of the Brittle and Quaziplastic Materials. Proc. Int. Conf. (SPM `94), (June 14-16, 1994, Riga, Latvia).
• 5-06.139V
  A. Rendtel, H. Hübner, M. Herrmann:SiCN-Mikrcomposit-Werkstoffe - neue kriechfeste Materialien. Fortschrittsberichte der DKG, Band 9, Heft4, (1994) 17-28.
• 5-06.140V
  C. Wolf, R. Kauermann, H. Hübner, J.A. Rodrigues, V.C. Pandolfelli: Creep Behaviour of High-Alumina Refractories Containing Different Amounts of Mullite-Zirconia Aggregate". Proc. 38th Brazilian Congress on Ceramics, pp. 1396-1401, (Blumenau, Brazil, 18.-21.6.1994) .
• 5-06.141V
  M. Klatt, D. Bellmann, R. Kampmann, R. Wagner, C. Wolf, H. Hübner: SANS Investigation of Creep Pores in Liquid-Phase-Sintered Alumina. Physica B 213 & 214(1995) 496-498 .
• 5-06.142V
  C. von Minden and H. Hübner:Einfluß keramischer Verstärkungselemente auf das Kriechverhalten von Oxidkeramiken und von Glas", in G. Petzow, J. Tobolski und R. Telle (Hrsg.),"Hochleistungskeramiken - Herstellung, Aufbau, Eigenschaften, VCH Verlagsgesellschaft Weinheim 1995.
• 5-06.143V
  M. Es-Souni, A. Bartels and R. Wagner: Creep behaviour of near -TiAl base Alloys,"effect of microstructure and alloy composition", Mater. Sci. Eng. A192/193 (1995) pp. 698-706.
• 5-06.144V
  A. Bartels, C. Koeppe, H. Mecking: Microstructures and Properties of Ti-48Al-2Cr after Thermomechanical Treatment, Mater. Sci. Eng. A192/193 (1995) pp. 226-232.
• 5-06.145V
  H. Clemens, C. Glatz, P. Schretter, C. Koeppe, A. Bartels, R. Behr, A. Wanner:Processing and Mechanical Properties -TiAl Based Alloy Sheet Material, Proc. ISGTA'95, Las Vegas, Feb. 13-16, 1995, Eds. Y.-W. Kim, R. Wagner, M. Yamaguchi, TMS Warrendale.
• 5-06.146V
  A. Bartels, C. Koeppe, T. Zhang, H. Mecking:Yield and Work Hardening of TiAl in the Regime of Inverse Strain Rate and Temperature Dependence, Proc. ISGTA'95, Las Vegas, Feb. 13-16, 1995, Eds. Y.-W. Kim, R. Wagner, M. Yamaguchi, TMS Warrendale.
• 5-06.147V
  H. Mecking, Ch. Hartig:Effects of Processing on Texture, Microstructure and Related Properties of TiAl Alloys. Proc. ISGTA'95, Las Vegas, Feb. 13-16, 1995, Eds. Y.-W. Kim, R. Wagner, M. Yamaguchi, TMS Warrendale.
• 5-06.148V
  S. Willems, H. Uhlenhut, A. Bartels, H. Mecking: High Temperature Deformation of Characteristics of -TiAl in Compression Tests, Proc. EUROMAT 95, 25.-28.9.1995, Padua, Italy.
• 5-06.149V
  H. Uhlenhut, S. Willems, A. Bartels, H. Mecking,""Textures and Mechanical Properties of Lamellar Microstructures in Ti-48Al-2Cr", Proc. EUROMAT 95, 25.-28.9.1995, Padua, Italy".
• 5-06.150V
  A. J. Beaudoin Jr., H. Mecking, U.F. Kocks,""Development of local shear bands and orientation gradients in f.c.c. polycrystals". Proc. Numiform, S.F. Chen and P.R. Dawson Ed., Balkema Publ. 1995".
• 5-06.151V
  C. Wolf, R. Kauermann, H. Hübner, J.A. Rodrigues, V.C. Pandolfelli,""Effect of Mullite-Zirconia Additions on the Creep Behaviour of High-Alumina Refractories", J. Eur. Ceram. Soc. 15(1995) pp.913-920".
• 5-06.153V
  M. Klatt, D. Bellmann, R. Kampmann, R. Wagner, C. Wolf, H. Hübner,"SANS Inve-stigation of Creep Pores in Liquid-Phase-Sintered Alumina". Physica B 213, 214 (1995), pp. 496-498".
• 5-06.154V
  M.Es-Souni, A.Bartels and R. Wagner,""Creep Behaviour of a Fully Transformed Near gamma-TiAl alloy Ti-48Al-2Cr", Acta Metall. Mater 43 (1995), pp. 153-161".
• 5-06.155V
  C. von Minden and H. Hübner,""Einfluß keramischer Verstärkungselemente auf das Kriechverhalten von Oxidkeramiken und von Glas", in: G. Petzow, J. Tobolski und R. Telle (Hrsg.): Hochleistungskeramiken - Herstellung, Aufbau, Eigenschaften, VCH Verlagsgesellschaft Weinheim 1995".
• 5-06.156V
  C. von Minden, C. Hedemann, H. Hübner,""Creep Behaviour of SiC-Particle-Reinforced Glass", in, P. Vincenzini (Hrsg.): ""Advances in Science and Technology", Vol. 3B - Ceramics: ""Charting the Future", Techna SrL, Italien 1995, pp. 843-850".
• 5-06.157V
  C. von Minden, B. Bergmann, C. Wolf, H. Hübner,""Superplasticity and Creep of TZP with Glass and Platelet Additions", in: P. Vincenzini (Hrsg.): Advances in Science and Technology, Vol. 3B - Ceramics: Charting the Future, Techna SrL, Italien 1995, pp. 867-874".
• 5-06.158V
  M. Klatt, D. Bellmann, R. Kampmann, R. Wagner, C. Wolf, H.Hübner,""Analysis of Creep Pores in Liquid-Phase-Sintered Alumina by Means of Joint Use of Conventional and High-Resolution SANS¿, in: D.A. Neumann, T.P.Russell, and B.J. Wuensch (Hrsg.): Neutron Scattering in Materials Science II, Mat. Res. Soc. Sympos. Proc. 376 (1995), pp. 365-370".
• 5-06.159V
  V.C Pandolfelli, J.A. Rodrigues, V.R.Salvini, C.Wolf, H.Hübner,""Thermomechanische Eigenschaften hochtonerdehaltiger Feuerfestwerkstoffe mit Mullit-Zirkonoxidzusätzen¿ (in portugiesisch), in: Annalen des 39. Kongresses der Brasilianischen Gesellschaft, Águas de Lindóia, São Paulo, Brasilien, 10.-13.6.1995, pp. 568-573".
• 5-06.160V
  V.C Pandolfelli, J. A. Rodrigues, C.Wolf, H.Hübner,""Evaluation of Thermomechanical Properties of Alumina Refractories Containing a Fused Mullite-Zircona Aggregate¿, in: Proceedings of UNITECR 95, Fourth Biennial Worldwide Conference on Refractories, Kyoto, Japan, November 1995, Vol. 2, pp. 373-380".
• 5-06.161V
  M. Es-Souni, A. Bartels and R. Wagner,""Creep Behaviour of Near Gamma-TiAl base Alloys: Effect of Microstructure and Alloy Composition", Mater. Sci. Eng. A192/193 (1995), pp. 698-706".
• 5-06.162V
  A. Bartels, C. Koeppe, H. Mecking,""Microstructures and Properties of Ti-48Al-2Cr after Thermomechanical Treatment", Mater. Sci. Eng. A192/193 (1995), pp. 226-232".
• 5-06.163V
  H. Clemens, C. Glatz, P. Schretter, C. Koeppe, A. Bartels, R. Behr, A. Wanner,""Processing and Mechanical Properties Gamma-TiAl Based Alloy Sheet Material", in: Y.-W. Kim, R. Wagner, M. Yamaguchi (Hrsg.): Proc. Intl. Symp. Gamma Titanium Aluminides, TMS Warrendale 1995".
• 5-06.164V
  A. Bartels, C. Koeppe, T. Zhang, H. Mecking,""Yield and Work Hardening of TiAl in the Regime of Inverse Strain Rate and Temperature Dependence", in: Y.-W. Kim, R. Wagner, M. Yamaguchi (Hrsg.): Proc. Intl. Symp. Gamma Titanium Aluminides, TMS Warrendale 1995".
• 5-06.165V
  H. Mecking, Ch. Hartig,""Effects of Processing on Texture, Microstructure and Related Properties of TiAl Alloys". in: Y.-W. Kim, R. Wagner, M. Yamaguchi (Hrsg.): Proc. Intl. Symp. Gamma Titanium Aluminides, TMS Warrendale 1995, pp. 525-538".
• 5-06.166V
  S. Willems, H. Uhlenhut, A. Bartels, H. Mecking,""High Temperature Deformation Characteristics of Gamma-TiAl in Compression Tests", Proc. EUROMAT 95, Padua, Italy, 25.-28.9.1995, pp. 55-60".
• 5-06.167V
  H. Uhlenhut, S. Willems, A. Bartels, H. Mecking,""Textures and Mechanical Properties of Lamellar Microstructures in Ti-48Al-2Cr", Proc. EUROMAT 95, 25.-28.9.1995, Padua, Italy, pp. 49-54".
• 5-06.168V
  A.J. Beaudoin Jr., H. Mecking, U.F. Kocks,""Development of local shear bands and orientation gradients in f.c.c. polycrystals", in: S.F. Chen and P.R. Dawson (Hrsg.): Proc. Numiform, Balkema Publ. 1995".
• 5-06.169V
  C. Wolf, R. Kauermann, H. Hübner, J.A. Rodrigues, V.C. Pandolfelli,""Effect of Mullite-Zirconia Additions on the Creep Behaviour of High-Alumina Refractories". J. Eur. Ceram. Soc. 15 (1995), pp. 913-920."
• 5-06.170V
  A. Rendtel, H. Hübner, M. Herrmann,""Creep Behaviour of Si3N4/SiC-Nanocomposite Materials". In: "Basic Science - Trends in Emerging Materials and Applications", Fourth Euro-Ceramics, Vol.4, Gruppo Editoriale Faenza E. S.P.A., (1995), pp. 225-232."
• 5-06.171V
  C. Koeppe, A. Bartels, H. Clemens, P. Schretter, W. Glatz,""Optimizing the Properties of TiAl Sheet Material for Application in Heat Protection Shields or Propulsion Systems". Mater. Sci. Eng., A201 (1995), pp. 182-193".
• 5-06.172V
  A. J. Beaudoin Jr., H. Mecking, U.F. Kocks,""Development of Local Shear Bands and Orientation Gradients in f.c.c. Polycrystals", pp. 225-230, in Shen & Dawson (Hrsg.): Simulation of Materials Processing: Theory, Methods and Applications, Balkema, Rotterdam. 1995, pp. 225-230".
• 5-06.173V
  M. Strothmann, H. Hübner, A. Rendtel, V.C. Pandolfelli, J.A. Rodrigues, A.P. Margarido, R.T. Noronha, C. Pagliosa, U. Mattos,""High-Temperature Performance of Cement-free and Low-cement Alumina Castables¿, in:¿Global Development of Refractories¿-Proceedings of the Unified International Technical Conference on Refractories, Fourth Biennial Worldwide Conference on Refractories, Kyoto, Japan, November 19-22, 1995, Vol. 1, pp. 343-350".
• 5-06.174V
  A. Rendtel, H. Hübner, C. Schubert,""Effect of Platelet Addition on Strength and Creep Restistence of Hot-Pressed Silicon Nitride". In: "Silicates Industriels", 60 (1995) 11-12, pp. 305-312."
• 5-06.175V
  B. Commentz, H.-G. Brokmeier, B. Witassek,""Eigenspannung und Texturen in zweiphasigen Fe-Cu-Verbunden¿, in: H.-G. Brokmeier, U. Zink, B. Witassek (Hrsg.): ¿TEX-2 - Experimental Reports 1995¿, GKSS Forschungszentrum, Geesthacht (1996), GKSS96/E/59, pp. 47-49".
• 5-06.176V
  H. Mecking, U.F. Kocks, Ch. Hartig,""Taylor Factors in Materials with Many Deformation Modes". Scripta mater., Vol. 35 (1966), pp.465-471".
• 5-06.177V
  H. Fukutomi, A. Nomoto, Y. Osuga, S. Ikeda, H. Mecking,""Analysis of Dynamic Recrystallization Mechanism in -TiAl Intermetallic Compound Based on Texture Measurement", Intermetallics 4 (1996), pp. 49¿55".
• 5-06.178V
  H. Mecking, Ch. Hartig, U.F. Kocks,""Deformation Modes in Gamma-TiAl as Derived from the Single Crystal Yield Surface". Acta mater. 44 (1996), pp. 1309-1321".
• 5-06.179V
  A. J. Beaudoin Jr., H. Mecking, U.F. Kocks,""Development of Localized Orientation Gradients in f.c.c. Polycrystals" , Phil. Mag. A 73 (1996), pp. 1503-1517".
• 5-06.180V
  D. Dunst, H. Mecking,""Analysis of Experimental and Theoretical Rolling Textures of Two-Phase Titanium Alloys", Z. Metallkd. 87 (1996), pp. 498-507".
• 5-06.181V
  C. Wolf, H. Hübner,""High-Temperature Failure of Vitreous-Bonded Alumina", in: R.C. Bradt et al. (Hrsg.): ¿Fracture Mechanics of Ceramics, Fatique, Composite and High-Temperature Behaviour¿, Plemm Press, New York, London, 1996, pp. 499-514".
• 5-06.182V
  H. Mecking, C. Hartig,""Texture, Processing and Properties of Intermetallic TiAl¿; in: Z. Liang, L. Zuo, Y. Chu (Hrsg.): ICOTOM-11 (11th Int. Conf. Textures of Materials 1996), Intl. Academic Publishers, 1996, pp. 653".
• 5-06.183V
  M. Koeppe, C. Hartig, H. Mecking,""Plastizität in D03-Geordneten Fe70 Al30¿, in: F. Aldinger, H. Mughrabi (Hrsg.): "Werkstoffwoche ¿96: Materialwissenschaftliche Grundlagen¿, DGM Informationsgesellschaft Verlag (1996), pp. 453-458".
• 5-06.184V
  A. Rendtel, H. Hübner,""Creep Behaviour and Lifetime of Si3N4/SiC", Ceramic Transactions, 74 (1997), pp. 523-534".
• 5-06.185V
  A. Rendtel, H. Hübner, J.A. Rodrigues, V.C. Pandolfelli,""Interpretation of the Creep Behaviour of Low-cement Refractory Castables by the Properties of the Interaggregate Glassy Phase¿, in: M.A.Stett (Hrsg.): "Refractories - A Worldwide Technology¿ -Proceedings of the Unified International Technical Conference on Refractories, Fifth Biennial Worldwide Conference on Refractories, New Orleans, USA, November 4-7, 1997, pp.71-80".
• 5-06.186V
  T. Zhang, H. Hübner, J.A. Rodrigues, V.C. Pandolfelli,""Effect of Hydratable Alumina Binder of the Creep Behaviour of Cement-Free High-Alumina Refractory Castables¿, in: M.A.Stett (Ed.) ¿Refractories - A Worldwide Technology¿ -Proceedings of the Unified International Technical Conference on Refractories, Fifth Biennial Worldwide Conference on Refractories, New Orleans, USA, November 4-7, 1997, pp. 1337-1346".
• 5-06.187V
  E. Müller, Ch. Oestreich, U. Popp, R. Herbig, G. Michel, A. Rendtel,""The Influence of the Preparation Conditions of Nano Crystalline Zirconia on Powder Processing and Ceramic Properties¿. in: D. Brotzmeyer, M. Boussuge, Th Chartier, G. Fantozzi, G. Lozes, A. Rousset (Hrsg.): "Euro-Ceramics V, Part I: Sessions 1A, 1C, 1D, 3¿ (Key Engineering Materials, Vol. 132-136), Trans Tech Publications, Switzerland (1997), pp. 169-172".
• 5-06.188V
  A.P. Chojacka, C.T. Avedisian, A. Rendtel,""The Thermal Diffusivity of Silicon Nitride/Silicon Carbide Composites using Photothermal Deflection Spectroskopy¿, in: Proceedings of the Royal Society A, in press".
• 5-06.189V
  A. Rendtel, H. Hübner,""Kriechverhalten von Si3N4/SiC-Nanocompositen¿, in: K. Friedrich (Hrsg.): "Verbundwerkstoffe und Werkstoffverbunde¿, DGM Informationsgesellschaft mbH 1997, pp. 229-234",
• 5-06.190V
  A. Rendtel, H. Hübner,""Creep and Failure of Si3N4/SiC Nanocomposites¿. in: A. Leriche, V. Lardot, D. Libert, I. Urbain (Hrsg.): ¿ Ceramic-Ceramic Composites IV¿, Silicates Industriels 1997,pp. 223-225".
• 5-06.191V
  P. Rendtel, A. Rendtel, H. Hübner,""Oxidation Effects in Si3N4 and Si3N4/SiC Nanocomposites¿. in: A. Leriche, V. Lardot, D. Libert, I. Urbain (Hrsg.): "Ceramic-Ceramic Composites IV¿, Silicates Industriels 1997, pp. 267-269".
• 5-06.192V
  A. Rendtel, H. Hübner,""Kriechverhalten und Lebensdauer von Si3N4/SiC Nanocompositen oberhalb 1400°C¿, Fortschrittsberichte der DKG Band 12, Heft 1, (1997), pp. 155-169".
• 5-06.193V
  A. Rendtel, H. Hübner, C. Pagliosa Neto, R.T.T. Noronha, U. Mattos,""Untersuchung und Bewertung des thermomechanischen Verhaltens feuerfester Werkstoffe mit hohem Aluminiumoxidgehalt¿ (in portugiesisch), in: 41. Kongreß der Brasilianischen Keramischen Gesellschaft, São Paulo, Brasilien, 3.-6.6.1997, pp".
• 5-06.194V
  V.C. Pandolfelli, A.P.M. Menegazzo, J.A. Rodrigues, A. Rendtel, H. Hübner,""Kriechversuche als Werkzeug zu Gefügedesign und Eigenschaftsbewertung moderner Feuerfestbetone¿ (in portugiesisch), in: 41.Kongreß der Brasilianischen Keramischen Gesellschaft, São Paulo, Brasilien, 3.-6.6.1997, pp".
• 5-06.195V
  M.H. Yoo, M. Koeppe, C. Hartig, H. Mecking, W. Hermann, H.-G. Sockel,""Effect of Temperature on Elastic Constants and Dislocation Properties of Fe-30% Al Single Crystals¿, Acta mater. 45(1997), pp. 4323-4332".
• 5-06.196V
  S. Willems, H. Uhlenhut, A. Bartels, H. Mecking,"¿Mikrostrukturelle Einflüsse auf die statische und dynamische Reckalterung in Ti48at%Al2at%Cr¿, in: F. Aldinger, H. Mughrabi (Hrsg.): ¿Werkstoffwoche ¿96:Materialwissenschaftliche Grundlagen¿, DGM Informationsgesellschaft 1997, pp.411-416".
• 5-06.197V
  B. Commentz, Ch. Hartig, H. Mecking,""Verfestigung und Texturen verformter zweiphasiger Fe-Cu-Verbunde unterschiedlicher Zusammensetzung" in: F. Aldinger, H. Mughrabi (Hrsg.): ¿Werkstoffwoche ¿96: Materialwissenschaftliche Grundlagen¿, DGM Informationsgesellschaft 1997, pp. 505-509".
• 5-06.198V
  M. Klatt, D. Bellmann, R. Kampmann, R. Wagner, C. Wolf, H. Hübner,""Joint Use of Double Crystal Diffractometry, Beam Broadening and Conventional SANS for Analysis of Creep Pore Formation in Liquid-Phase Sintered Alumina¿, Physica B 234-236 (1997), pp. 1019-1021".
• 5-06.199V
  M. Klatt, D. Bellmann, R. Kampmann, R. Wagner, C. Wolf, H. Hübner,""Analysis of Creep Pore Formation in Liquid-Phase Sintered Alumina¿, Mater. Sci. Eng. A 234-236 (1997), pp. 932-935".
• 5-06.200V
  C. Hartig, M.H. Yoo, M. Koeppe, H. Mecking,""Effect of Temperature on Elastic Constants and Deformation Behavior in Shear Tests of Fe-30% Al Single Crystals¿, Mat. Sci. Eng. A258 (1998), pp. 59-64".
• 5-06.201V
  M. Herrmann, C. Schubert, A. Rendtel, H. Hübner,""Silicon Nitride/Silicon Carbide Nanocomposite Materials: I, Fabrication and Mechanical Properties at Room Temperature", J. Am. Ceram. Soc., 81 (1998), pp. 1095-1108".
• 5-06.202V
  A. Rendtel, H. Hübner, M. Herrmann, C. Schubert,""Silicon Nitride/Silicon Carbide Nanocomposite Materials: II, Hot Strength, Creep, and Oxidations Resistance", J. Am. Ceram. Soc., 81 (1998), pp. 1109-1120".
• 5-06.203V
  E. Müller Ch. Oestreich, U. Popp, R. Herbig, G. Michel, A. Rendtel,""The Influence of the Preparation Conditions of Nanocrystalline Zirconia on Powder Processing and Ceramic Properties", Polish Ceramic Bulletin 15, Polish Academy of Science ¿ Kraków Division, Papers of the Commission on Ceramic Science, Polish Ceramic Society ", Ceramics 53 (1997), p. 211".
• 5-06.204V
  E. Müller, Ch. Oestreich, U. Popp, G. Michel, A.Rendtel,""Investigations of nanocrystalline ceramics and powders by TEM, AFM and plasticity measurements", Fresenius J Anal Chem 361:(1998), pp. 594-597".
• 5-06.205V
  R. Lebensohn, H. Uhlenhut, C. Hartig, H. Mecking,""Plastic Flow of Gamma-TiAl-Based Polysynthetically Twinned Crystals: Micromechanical Modeling and Experimental Validation", Acta mater. 46 (1998), pp. 4701-4709".
• 5-06.206V
  A. Rendtel, H. Hübner,""Calculation of the Shape Change of Refractory Linings Using the Creep Properties of the Employed Materials", Stahl und Eisen SPECIAL, Sept. 1998, pp. 135-139".
• 5-06.207V
  Bartels, Ch. Hartig, St. Willems, H. Uhlenhut,"" Influence of the Deformation Conditions on the Texture Evolution in Gamma-TiAl¿, Mat. Sci. Eng. A 239-240 (1997), pp. 14-22".
• 5-06.208V
  A. Bartels, H. Uhlenhut,""Anisotropy of plastic flow in strongly textured Gamma-TiAl-based alloys¿, Intermetallics 6 (1998), pp. 685-688".
• 5-06.209V
  T. Klassen, R. Günther, B. Dickau, F. Gärtner, A. Bartels, R. Bormann, H. Mecking,""Processing and Properties of Intermetallic/Ceramic Composites with Interpenetrating Microstructure¿, J. Am. Ceram. Soc. 81(1998), pp. 2504-506".
• 5-06.210V
  H. Mecking und A. Bartel,""Festigkeit und Duktilität von intermetallischen Aluminiden¿ in: Danzer und M. Pohl (Hrsg.): Proc. ¿Gefüge und Bruch¿, Leoben, 20.-22. März 1996, pp".
• 5-06.211V
  G. Bermig, A. Bartels, H. Mecking, A. Oscarsson, B.- Hutchinson,""Entwicklung der Mikrostruktur und der Textur von Aluminiumlegierungen beim Flachstauchen im Hochtemperaturbereich¿ in: ¿Werkstoffwoche ¿96, Simulation, Modellierung, Informationssysteme¿, DGM Informationsgesellschaft 1997, pp. 119-123".
• 5-06.212V
  B. Commentz,""Residual Strain in Fe-Cu-Composites, Part 1: Experimental¿, in: H.-G. Brokmeier, B. Witassek (Hrsg.): ¿TEX-2-Experimental Reports 1996¿, GKSS-Publikation GKSS 97/E/72, Geesthacht (1997), pp. 39-42".
• 5-06.213V
  W. Oelerich, S. Willems, A. Bartels, H. Mecking,""Texturentwicklung von Ti58a%Cr während der thermomechanischen Behandlung¿ Proc. der Werkstoffwoche 1996, Symposium 7, (1996), pp. 429-434".
• 5-06.214V
  G. Bermig, A. Bartels, H. Mecking,""Analysis of Flow Behaviour and Texture Evolution of a Particle Hardened Aluminum Alloy in Plane Strain Deformation¿, in: Proc. ICAA5, Grenoble, July 1-5, 1996, pp. 429-434".
• 5-06.215V
  St. Willems, H. Uhlenhut, A. Bartels, H. Mecking,""Thermal and Athermal Deformation Processes in Equiaxed Ti-48Al-2Cr between Room Temperature and 600°C¿, in: W.O. Soboyejo, T.S. Sritvatsan, H.L. Fraser (Hrsg.): ¿Deformation and Fracture of Ordered Intermetallic Materials¿, TMS, Warrendale, Pennsylvania1997, pp. 207-215".
• 5-06.216V
  A. Bartels, H. Clemens, C. Hartig, H. Mecking,""Mechanical Anisotropy in Sheets of Gamma-TiAl Alloys¿ in: C. Koch, C.T. Liu, N. Stoloff, A. Wanner (Hrsg.:) "High-Temperature Ordered Intermetallic Alloys-VII¿; MRS Vol. 460 (1997), pp. 141-146".
• 5-06.217V
  G. Bermig, A. Bartels, H. Mecking, Y. Estrin,""A Unique Description of Steady State Deformation of Al and Al-Mg Alloys¿,Mater. Sci. Eng. A234-236 (1997), pp. 904-907".
• 5-06.218V
  R. Gerling, A. Bartels, H. Clemens, M. Oehring and F.-P. Schimansky,""Properties of two-phase intermetallic (Ti,Nb)3(Al,Si) + (Ti,Nb)5(Si,Al)3 P/M bulk and sheet material¿, Acta. mater. 45 (1997), pp. 4057-4066".
• 5-06.219V
  R. Gerling, A. Bartels, H. Clemens, M. Oehring and F.-P. Schimansky,""Properties of two-phase intermetallic (Ti,Nb)3(Al,Si) + (Ti,Nb)5(Si,Al)3 P/M bulk and sheet material¿, Acta. mater. 45 (1997), pp. 4057-4066".
• 5-06.220V
  C. Michaelsen, P. Ricardo, D. Anders, M. Schuster, J. Schilling, and H. Göbel, "Improved graded multilayer mirrors for XRD applications", Adv. X-ray Anal. 42, 308 (2000).
• 5-06.221V
  B. Commentz, Ch. Hartig, H. Mecking: "Micromechanical interaction in two-phase iron-copper polycrystals", Computational Materials Science, 16 (1999) p.237-247
• 5-06.222V
  M. Schuster, H. Göbel, L. Brügemann, D. Bahr, F. Burgäzy, C. Michaelsen, M. Störmer, P. Ricardo, R. Dietsch, T. Holz, and H. Mai, "Laterally graded multilayer optics for x-ray analysis", Proc. SPIE 3767, 183 (1999).
• 5-06.223V
  M. Koeppe, Ch. Hartig, H. Mecking: "Anomalies of the plastic yield stress in the intermetallic compound Fe-30at.%Al", Intermetallics 7 (1999), p.415-422
• 5-06.224V
  H. Hübner, P. Rendtel und A. Rendtel: Si3N4/SiC-Nanocomposite für Höchsttempera-turanwendungen, in J. Heinrich, G. Ziegler, W. Hermel und H. Riedel (Hrsg.): Kera-mik/Werkstoffwoche 98, Band VII, Symposium 9, Wiley - VCH 1999, pp. 483- 488.
• 5-06.225V
  P. Rendtel, A. Rendtel, H. Hübner, H. Klemm and M. Herrmann: Effect of Long-Term Oxidation on Creep and Failure of Si3N4 and Si3N4/SiC Nanocomposites, J. Eur. Ceram. Soc. 19, No. 1(1999)217-226.
• 5-06.226V
  V.C. Pandolfelli & J.A. Rodrigues, A.P.M. Menegazzo, A. Rendtel & H. Hübner: High Temperature Mechanical Tests as a Tool for the Microstructural Design and Evaluation of Advanced Castables, Refractories Application, January 1999.
• 5-06.227V
  A. Rendtel, D. Bellmann, R. Kampmann und H. Hübner: Kriechverhalten und Kriech-schädigung von Si3N4/SiC-Nanocompositen unter Zugbelastung, in K. Schulte und K. H. Kainer (Hrsg.): Verbundstoffe und Werkstoffverbunde, Wiley-VCH 1999, pp. 411-416
• 5-06.228V
  M. Sternitzke, T. Zhang, F. Meschke und H. Hübner: Kriechverhalten von gesinterten Aluminiumoxid/Siliziumcarbid Nanokomposit-Keramiken. in K. Schulte und K. H. Kainer (Hrsg.): Verbundwerkstoffe und Werkstoffverbunde, Wiley-VCH 1999, pp. 313-318
• 5-06.229V
  M. Sternitzke, T. Zhang, F. Meschke and H. Hübner: Creep behavior of pressureless sintered alumina/ silicon carbide nanocomposites, Proc. EUROMAT 99, München 10/1999.
• 5-06.230V
  A. Rendtel and H. Hübner: Creep Resistant Silicon Nitride Ceramics - Approaches of Microstructural Design, Ceram. Eng. Sci. Proc. 21, No. 3-4(2000), in press.
• 5-06.231V
  T. Klassen, M. Oehring und R. Bormann, "Microscopic Mechanisms of Metastable Phase Formation During Ball Milling of Intermetallic TiAl Phases", Acta mater. 45 (1997), 3935
• 5-06.232V
  Z.Q. Guan, Th. Pfullmann, M. Oehring und R. Bormann, "Phase Formation During Ball Milling and Subsequent Thermal Decomposition of Ti-Al-Si Powder Blends", J. Alloys and Compounds 252 (1997), 245
• 5-06.233V
  T. Klassen, R. Günther, B. Dickau, A. Bartels, R. Bormann und H. Mecking, "Processing and Characterization of Novel Intermetallic/Ceramic Composites", Mater. Science Forum 269-272 (1998), 37
• 5-06.234V
  T. Klassen, W. Oelerich, K. Zeng, R. Bormann und J. Huot, "Nanocrystalline Mg-based Alloys for Hydrogen Storage", in: "Magnesium Alloys and their Applications", Hrsg. B.L. Mordike und K.U. Kainer, Werkstoff-Informationsgesellschaft mbH, Frankfurt (1998), 307 und GKSS 98/E/9
• 5-06.235V
  T. Klassen, R. Günther, B. Dickau, F. Gärtner, A. Bartels, R. Bormann und H. Mecking, "Processing and Properties of Intermetallic/Ceramic Composites with Interpenetrating Microstructure", J. Amer. Ceram. Soc. 81 (1998) 2504
• 5-06.236V
  R. Günther, T. Klassen, B. Dickau, A. Bartels und R. Bormann, "Herstellung und Eigenschaften intermetallischer keramischer Verbundwerkstoffe", Proc., "Werkstoffwoche '98, Band VII: Keramik/Simulation Keramik", Wiley-VCH, 681-686, 1998
• 5-06.237V
  R. Günther, T. Klassen, A. Bartels und R. Bormann, "Neuartige Nb- und Ti-metallverstärkte Al2O3-Verbundwerkstoffe: Herstellung, Eigenschaften und potentielle Anwendungen", Hrsg. Prof. Dr. J. Kriegmann, Fachverlag Deutscher Wirtschaftsdienst GmbH, in Druck
• 5-06.238V
  K. Zeng, T. Klassen, W. Oelerich und R. Bormann, "Critical Assessment and Thermodynamic Modeling of the Mg-H System", Intl. J. Hydrogen Energy 24 (1999), 989-1004
• 5-06.239V
  K. Zeng, T. Klassen, W. Oelerich und R. Bormann, "Thermodynamics of the Ni-H System", J. Alloys and Compounds 283 (1999), 151-161
• 5-06.240V
  K. Zeng, T. Klassen, W. Oelerich und R. Bormann, "Thermodynamics Analysis of the Hydriding Process of Mg-Ni Alloys", J. Alloys and Compounds 283 (1999), 213-224
• 5-06.241V
  R. Bohn, G. Fanta, R. Günther, B. Dickau, T. Klassen, F. Gärtner, A. Bartels und R. Bormann, "Mechanical Properties of Intermetallic/Ceramic Composites Prepared by High Energy Milling", Proc. ISMANAM '98, Hrsg. A. Calka, D. Wexler, Journal of metastable and nanocrystalline materials 2-6 (1999) and Mater. Science Forum, 312-314, Trans-Tech. Publications, Switzerland (1999), 575-580
• 5-06.242V
  R. Bohn, G. Fanta und R. Bormann, "Improved hot workability of g-TiAl-based composites by grain refinement", Proc. EUROMAT '99, in Druck
• 5-06.243V
  W. Oelerich, T. Klassen und R. Bormann, "Nanocrystalline Metal Hydrides for Hydrogen Storage", Proc. EUROMAT '99, in Druck
• 5-06.244V
  R. Günther, T. Klassen, B. Dickau, F. Gärtner, A. Bartels und R. Bormann, "Preparation and Properties of novel Nb- and Ti-based metal reinforced Alumina Composites with interpenetrating Microstructure", Proc. EUROMAT '99, in Druck
• 5-06.245V
  F. Gärtner, R. Bormann, T. Klassen, H. Kreye, N. Mitra, "Nanocrystalline Composites for Thermal Spray Applications", Keynote Lecture, International Conference on Metastable, Mechanically Alloyed and Nanocrystalline Materials, ISMANAM 99, held in Dresden, Germany, August 29 - September 03, 1999, to be published in Materials Science Forum.
• 5-06.246V
  F. Gärtner, H. Kreye, R. Bormann, T. Klassen, "Titanium Carbide Based Cermets for Thermal Spray Applications", International Congress on Advanced Materials and Processes, EUROMAT 99, held in München, Germany, September 27 - September 30, 1999, Volume 11, Surface Engineering (ed.: H. Dimigen), WILEY-VCH, Weinheim, Germany, 2000
• 5-06.247V
  F. Gärtner, H. Kreye, V. Borck and W. Krömmer, "The Effect of Oxidation on Microstructure and Properties of TiC-Based Cermet Coatings" , Proc. ITSC 2000, held in Montreal, Canada, 8 - 11-May 2000 (ed.: C.C. Berndt), ASM International, 2000.
• 5-06.248V
  W. Schillinger, A. Bartels, K. Kishida: "Mechanical Anisotropy in Textured Sheets of g-TiAl"; in: D.G. Morris, S. Naka, P. Caron (Eds.), Intermetallics and Superalloys, Euromat Vol. 10, Wiley-VCH, (Weinheim, 2000), pp. 378

Dissertationen

• 5-06.006D
  Wolfgang Schröer: Plastisches Verhalten von Einkristallen aus intermetallischen Verbindungen auf der Basis Fe3 (Al,Si), 1992.
• 5-06.007D
  Harald Bosse:Untersuchungen der Konstitution und zum Verformungsverhalten von intermetallischen Phasen auf der Basis von Fe3 (Al,Si), 1992.
• 5-06.008D
  Joerg Seeger: Plastisches Fließen, Verfestigung und Gefügeentwicklung in zweiphasigen TiAl-Legierungen, 1993.
• 5-06.009D
  Wilson Acchar: Kriechverhalten plättchenverstärkter Siliciumnitridwerkstoffe, 1993.
• 5-06.010D
  Andreas Giese: Mechanisches Verhalten von ein- und vielkristallinem Aluminium und der Eisenbasislegierung INCOLY 800H unter Wechselbelastung, 1994.
• 5-06.011D
  Christian Wolf: Kriechverhalten von glasphasehaltigem Aluminiumoxid, 1994.
• 5-06.012D
  Dietmar Dunst ,"Hochtemperatur-Walztexturen und Koverformung der alpha- und beta-Phase zweiphasiger Titanbasislegierungen, 1996".
• 5-06.013D
  Stefan Willems ,"Reckalterungs- und Korngrößeneffekte bei plastischer Verformung von Ti-48Al-2Cr mit globularem Gefüge, 1998".
• 5-06.014D
  Claus von Minden,"Der Einfluß keramischer Verstärkungselemente auf die Kriechfestigkeit von Oxidkeramiken und von Glas, 1996".
• 5-06.015D
  Henning Uhlenhut: "Ursachen plastischer Anisotropie von Gamma-TiAl-Basislegierungen", Dissertation TU-Hamburg-Harburg, 1999, (Shaker Verlag, Aachen 1999), ISBN 3-8265-6222-4
• 5-06.016D
  Björn Commentz: "Plastische Verformung von zweiphasigen Eisen-Kupfer-Verbundwerkstoffen", Dissertation TU Hamburg-Harburg, 1999